Adam Colins 2
Members-
Posts
30 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Calendar
Downloads
Everything posted by Adam Colins 2
-
Hi All, A little confusing but i think i will stick with origional JR Receivers where possible, however i will give the Lemon RX a look at. Thanks for all the info Adam
-
Hi all. I have just purchased a 2.4 DSX9 and I am looking for GOOD compatible receivers. I dont want to cut costs I would like a good reliable receiver
-
Flair Lightning
Adam Colins 2 replied to john stones 1 - Moderator's topic in Classic Aerobat Build Blogs
My Super Lightning in action Edited By Adam Colins 2 on 10/01/2017 10:52:02 Edited By Adam Colins 2 on 10/01/2017 10:52:22 -
Woohoo!!! Found one at the Range £7.99 12 volt pump 100 psi should do the trick... I will let you all know when the air flows Cheers Adam,
-
Hi All, I am looking for a retract pump or something to adapt 12vlt maybe any ideas... I don't fancy paying £50 for a new one when i know i have one around but cannot for the life of me find it... Any advice would be greatly received... Thanks Adam
-
I will update you on fingers crossed improved flight..thanks again for your help Steve.
-
Hi all, Well good news...put a new apc 11x8 prop on connected to watt meter and now 260watt at 26amp... Think this is about where I need to be. Thanks again for the help everyone
-
Me and Dad will be there...See you soon
-
Hi Steve The battery I am using is a 25c overlander 2200mah 11.1 3S...
-
WOW Thanks for the help everyone. I hooked my set up to the watt meter with a 12 x 8 apc prop and it is pushing 340w at 35a....I think i will increase the esc size to a 40 or 60amp though So i think i will look at about a 11x8 or 11x10 prop and i think i will be somewhere where i need to be, Thanks again for all the help and info this has greatly helped me with future setups.. Like the saying goes if you don't ask you don't know...
-
Thank you everyone I am going to try different props and see if I increase the watts. I will keep you all posted
-
Well it seems the motor is only putting out 175.6w and 15.5a at full throttle. My guess is a bigger motor and esc..
-
Thanks guys, I will purchase a watt meter and get back to you with figures.
-
Hello Can you help I have a small F3A aerobatic model wingspan 1220mm weight 970g fitted with a turnigy D3536/8 1000kv motor turnigy 30 amp esc and a 3s 2200 lipo. Swinging a 10x6 prop. My problem is that it seems underpowered. Is there anything I can do or is it a case of replace motor and esc. My understanding is that for a aerobatic/sport model it should be about 150w per lb. The motor is 430 wattEdited By Adam Colins 2 on 10/10/2016 21:45:02
-
Hi all I think I will look at kitting the dalotel first.any takers for this kit. I am open to suggestions or ideas
-
I am certainly thinking about producing limited kits. Which one would everybody like to see first and has anyone got details, plans etc
-
Hanger 9 how much would you like for the dalotel. Let me know I am interested. Cymaz I would greatly appreciate the plans if you could dig them out. They were great models and I would like to see them available again. Thanks Adam
-
Hi everyone I am trying to locate Dave Smith Models kits. I believe they were sold off to Marvic Models. Any information you could provide would be much appreciated. Even if I can locate the tooling to reproduce the kits. Any information on the location of the templates or tooling would be great. Thanks Adam
-
Hi All, I found this site when ordering my Wolfgang Matt Atlas. You all may already know of it but i thought i would share it anyways lots of good stuff on here, Cheers Adam http://www.outerzone.co.uk Edited By Adam Colins 2 on 20/04/2016 11:14:38
-
Hi Guys, I noticed people wearing UKCAA Jumpers and hats. Are these available? Also what is the font used for UKCAA as I would like to have some lettering printed for my model. Many Thanks Adam