Brian Boucher
-
Posts
21 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Blogs
Gallery
Calendar
Downloads
Everything posted by Brian Boucher
-
Just exhaust to add colour scheme 1940 experimental camflouge finished in oratex and spray painted finished AUW is 4Lb. 1 Oz abit on the heavy side but should be ok had to add 1Lb 1Oz of lesd.
-
-
thanks for the reply Phil the only addition to the plan i used 2 servos for the aelirons i think perhaps i did not shave enough wood off the rear end.
-
I have just completed mine and did a trial balance and found that had to add 1lb 1oz to get it to balance giving me a flying weight of 4lb 1oz , i have covered it in oratex and spray painted i would not have think that would have increased over a 1lb on the protoype weight any thoughts ???
-
I would like to thank the developers of the hurricane and that this is the place for building tips and small corrections required and not the place for criticizing all the work that has gone into this project.
-
Hi Phil have now corrected and i always do trial dry fit so no problem
-
Cheers Andy
-
Just put fuz sides & front on bench the front key does not fit in cutouts on side there is about 1/8" gap each side am I missing something ??
-
-
Received my kit yesterday making a start soon. Here is a link to a lot of possible colour schemes https://www.google.co.uk/search?q=&tbm=isch&tbs=rimg:CZzRlPpQ7RtNIjjWXUQ9eVCTfLl9v7cjZVCv61uMZ72AFEVCti4DLYx_11zn6lUBUXCGjFTt-ijAzqCEar8YS_1z_1XuSoSCdZdRD15UJN8EXitDj8qfNd4KhIJuX2_1tyNlUK8RmyMUl0Recq0qEgnrW4xnvYAURRFOPdIltV6K9ioSCUK2LgMtjH_1XEcTEDTCgknEhKhIJOfqVQFRcIaMRRFmodmOXknAqEgkVO36KMDOoIRHkamoUrss-9yoSCRqvxhL_1P9e5Ee5n5ZTKHCXk&tbo=u&sa=X&ved=0ahUKEwiHy8W-tt_ZAhWKIsAKHQC7Bo4Q9C8IGQ&biw=1920&bih=922&dpr=1
-
PSS A-4 Skyhawk - The completed model thread
Brian Boucher replied to Phil Cooke's topic in PSSA Mass Build 2016 - A4 Skyhawk
Maiden flight today for myself & Bryan Tucker at Frocester hill near Stroud, wind strength was 18 to 25 MPH. flights went well with 2 landings with no damage. -
-
-
-
PSS A-4 Skyhawk - The completed model thread
Brian Boucher replied to Phil Cooke's topic in PSSA Mass Build 2016 - A4 Skyhawk
ET Equipments that was a while ago. see you in september Andy -
PSS A-4 Skyhawk - The completed model thread
Brian Boucher replied to Phil Cooke's topic in PSSA Mass Build 2016 - A4 Skyhawk
I had intended to do a paint job but then came across a dark blue roll of pro film i had forgotten i had no it is not matt. -
PSS A-4 Skyhawk - The completed model thread
Brian Boucher replied to Phil Cooke's topic in PSSA Mass Build 2016 - A4 Skyhawk
This is my first post just finished my A4 the build went quite well I decided to glue the air intakes to the fuz before covering then it would be easier to blend the edges with light weigh filler. The final all up weight was 2lb 5oz, the balance was achieved by just the battery pack fitted fully forward. -
-
-
Hi David Thanks for the advice
-
Just finished the Sukhoi any advice on first flight, i am a fairly compentent flyer but mainly gliders but have some small electric models the largest being a Dingo from Puffin Models. thanks Brian
