Patrick Adams
Members-
Posts
26 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Blogs
Gallery
Calendar
Downloads
Everything posted by Patrick Adams
-
Thanks david will do.
-
Hi all does any one out there have the correct c of g details for a fibre clasics gas turbine powered kangaroo mark 1 ? Any help would be very welcome thankyou.
-
Hi yes it can be done. simple realy get yourself a flight sim and crash as many times as you like on the pc first till you master it. But remember dont run. good luck......
-
The October Grand Prize Draw
Patrick Adams replied to David Ashby - Moderator's topic in All Things Model Flying
Looks like it would make a nice winter hack, so please count me in cheers.... -
The August Grand Prize Draw
Patrick Adams replied to David Ashby - Moderator's topic in All Things Model Flying
Yes please count me in to. -
The August Grand Prize Draw
Patrick Adams replied to David Ashby - Moderator's topic in All Things Model Flying
Well i will be buying one of these if idont win. I was looking at one at the shop the other day. See you all at the nats if your going cheers..... -
The July Grand Prize Draw
Patrick Adams replied to David Ashby - Moderator's topic in All Things Model Flying
Very nice, i always say yes to a little extra. -
The July Grand Prize Draw
Patrick Adams replied to David Ashby - Moderator's topic in All Things Model Flying
Very nice, yes please i could see this one in my hanger. -
The June Grand Prize Draw
Patrick Adams replied to David Ashby - Moderator's topic in All Things Model Flying
Well count me in please. I fancy a nice war bird. -
Hi all well iam here again trying to win a nice kit. we all live in hope dont we. Apart from me i live in yorkshire.
-
The April Grand Prize Draw
Patrick Adams replied to David Ashby - Moderator's topic in All Things Model Flying
please count me in , would love this one. -
The April Grand Prize Draw
Patrick Adams replied to David Ashby - Moderator's topic in All Things Model Flying
I would realy like a chance with this one as i had trouble with my h9 one. so please count me in cheers. -
Hi all iam looking at buying a Futaba 6ch computer radio set, as a slave set for training only. The set i have chance of is a good price . However it is a 72mhz set, i'am fully aware that this set cannot be used for flying in this country but it would only ever be used as a slave radio conected with a buddy lead to my futaba 35mhz 6exap. So the question is can you connect the two in this manner? When you think about it you dont have a crystal in the slave radio, antenna is down and its powered by the master radio my 35mhz set.
-
The March Grand Prize Draw
Patrick Adams replied to David Ashby - Moderator's topic in All Things Model Flying
Please count me in . That would do nicely thankyou. -
4-Max power package prize draw entries!
Patrick Adams replied to David Ashby - Moderator's topic in All Things Model Flying
Ok if i must. -
Dont use cyno. Check first on some scrap you could melt your model. You can buy foam freindly cyno from good model supliers.
-
The March Grand Prize Draw
Patrick Adams replied to David Ashby - Moderator's topic in All Things Model Flying
Yes please, I Have just the motor for that little bute. -
The February Grand Prize Draw
Patrick Adams replied to David Ashby - Moderator's topic in All Things Model Flying
Hi David that would just be a fantastic addition to my small hanger. mmmmmmmmm as if , me win something yeright.... -
Pick a plane 2008!
Patrick Adams replied to David Ashby - Moderator's topic in All Things Model Flying
Come now lets keep it simple . A nice chilly wind plan would be nice please. -
The word is twister bell 47 they are fantastic. I have just bought one, my progress is unbeleavable in just a few days. The upside is that when and if you have a prang, you can buy any single part that you break. Blades are very cheap on ebay. By the way if you are a new heli pilot like me, keep it simple, learn to crawl first then walk. DONT RUN forget 3D for the time being.
-
Hi Graham ref the cub, as i opened my hanger nine box with the usual anticipation a new kit brings. I was very impressed with what i saw, a very well pesented and packed kit. Apart from the cowel, upon closer inspection i found lots of star cracking in the gelcoat finish and one crack that was a little more worrying. I contacted helger distribution and was rewarded with a dont give a toss attitude from the guy on the line. After a while he said he could have a look at it for me if i wanted , then promtly offered to sell me a replacement. Anyway grumble done with. I had no problems with the rest of the kit once i had done the ironing. My screen fit perfect by the way. So realy to sum up iam very pleased with the finished plane and eagerly awaiting some fine weather for a test flight. (Cowel sorted with addition of some carbon strands inside then refinished outside) CHECK COWEL BEFORE YOU TAKE ONE HOME IF OK THEN ENJOY IT BECAUSE ITS A FINE PLANE.
-
Try ebay there are loads of four strokes on there.
-
Hi Graham just a quick note to say i bought a hanger 9 cub a short while ago and ive finished it apart from one little job to do. The saito 82a motor is a perfect fit, cowel was very thin and covering was great once ironed back on. Anyway one job to do, iam off to move my pilot.
-
futaba servo
Patrick Adams replied to Patrick Adams's topic in Building from Traditional Kits and Plans
Bob thankyou for the advice, i will enquire about this part number thanks again Pat. -
You can buy foam tube from your model shop for this purpose, however it can be pricey.Use foam or a car wash sponge cut to size and lacky bands.