tspr12

OK Now I understand it. I'll make it that way. Well thank you Jozef

I'm continuing to build, but one thing stopped me yesterday. I wanted to cover the bottom of the fuselage. With the orientation of the wood grain as shown in the color picture, he could not make a bend through F5. I have built many models, but the orientation of the wood grain has always been along the length of the fuselage. Is this orientation of the wood fibers correct?

I put the servos in the right position and tried it. The directions of movement are also correct! On my transmitter, it is not possible to change the direction of movement of the servos, so I have to do it with the position of the servos.

I would like to use spinner cooling. I'm curious myself how it will work. I will also have to modify the C1. Just like the cooling air supply, the warm air outlet is also important. The cross-section of the output should be larger than that of the input. I still don't know where the warm air leaves the fuselage. What is your opinion?

Thanks for the answers! The size of the wire for the landing gear is now completely clear to me. I also understood the dowel in wing theme. We simply call it a wooden peg. It can be bought, but I also have a lathe, so I will make it. I decided to turn the servos and replace the circular rod with a lever. Access to the servers will be without problems. Thanks everyone for your help Jozef

Hi everybody Hi Peter I also started building a dog. I'm already quite advanced. Yesterday he installed the servos according to the drawing and I found out that the snakes go completely differently. Only today I found out on the forum that they should be installed the other way around. I have a topic to think about now. I work in mm (so from Slovakia) and the front landing gear is made of 8SWG wire which according to: https://www.justfreetools.com/en/swg--to-mm-calculator the diameter of the wire is 4 mm. It's true? It seems too thick a wire to me. My last topic is the dowel in the wing. What exactly is that? How is it mounted? Could I see a photo? Well thank you Josef

Hello Mr. Miller I am from Slovakia. I found your model HOUD DOG in electronic format RCM&E 10/2022. I like the shape and dimensions of the model. That's why I have a question. Can I get a model drawing in electronic format? Thank you for understanding. Joseph