Dan C

This always confuses me for some reason   I use a JR transmitter but most my models are a mix of futaba and hitec receivers. When buying new crystals i know i got to have a jr one in the tx but what about the rx's Do they have to be the same make as the tx or the same make as the rx?   For example: JR tx crystal and jr rx crystal in a futaba rx  or  JR tx crystal but use a futaba crystal in a futaba rx   Cheers for your help   Dan

Thanks for all the replys guys, i check out the early posts and all seems to be well with the engine phsically Shaun thank you very much, im not sure why i went to a enya 3 since all my os engines have a os plug in. Thanks again   Dan

I always drain fuel and surely it would stop after a while, not every flight

I have a new OS61 with a tuned pipe fitted to my panic. The engine runs fine with 1 1/2 ish turns on the carb and 15% fuel What does worry me is the amount of black/brown liquid that shoots out the other end. I dont know if this is related to the fact that at times the engine conks out. (i put this down to over a year old fuel and will be changing to technics 10% this week, it doesnt affect other planes though) I have a enya no.3 fitted aswell.   It cant be beacause its a new engine as i have just fitted a new os 46 to another plane and it is a beauty to start and run.   Cheers for your help   Dan

Lol here goes Its a Extra 300 ARTF for 46+ two stoke engines or a 70 FS Comes in yellow and blue scheme and its most distinguishing feature is the pilot who is just a head with a crash helmet on. Also the company may have gone bust recently. Thanks for your help guys Dan

The tinyest amount of superglue is best...works for loads of us over at RC Heliaddict

I'll give it a go

Do they still sell the kits then? Regards Dan

11x7 it is...cheers guys

For a trainer would i use a 11x7? the prop chart has so many choices??????????

It is a known fact that fun fighters are.....FUN. I think a nice list of kits and ARTF's available would be good. ModelTech i cant seem to find a uk distributer as the ARC mustang has a lot of the hard work done but still leaves the covering up to your own taste. I come from cornwall were funfighters are big especially in Redruth and now living in wiltshire i would like to start a trend here and maybe get some club stuff going on. Of course ARTFs are good as it gets you in the air quicker but i would still like to find a supplier for the ARC mustang and any other kits/ARTF's out there. Im sure there are more and would love some links The ones that i know of are.... KITS Cambrian Funfighters ARTF's GreatPlanes Corsair GreatPlanes Spitfire GreatPlanes P40 GreatPlanes Mustang ModelTech Mustang ModelTech Mustang ModelTech Mustang ModelTech 109 ARC ModelTech Mustang Regards Dan

Can anyone name any kits being manufactured? I know Protech do the IBIS 120 but is there any more? regards Dan

I would kill to get my hands on the kit...not the artf version

Panic 25th Aniversary Futaba 6EXP 2.4GHz with 5 servos O.S. FL-70  What do u think....good enough engine?

Well im just about to move to wilshire on monday but Lulworth Cove has some nice hillls around it and you get the sea breeze to use :)

Thnaks for the link Grant. Im checking it out now.

Its time to have a good old fashioned debate......who's in :) Toy planes, what do you think of them as there has been a massive increase over the past couple of years. Good or Bad Personaly i dont like them as people are flying around thinking they are topgun with no insurance or training. I would go on but its time for other peoples views

Any size at the minute. Considering options then getting an engine to fit :) Cheers for answering Grant

Im going to be using chipboard. Its cheap and you can still get tacs through it.

Still having problems :(. Also looking for 3D profile aircraft, does anyone know any free plans sites please. Cheers Dan

I will have a look, cheers David

I would like to build a 3D craft, the ones that look like the weston cougar. Does anyone know any plans about please Cheers Dan

Cheers for the info. Lokk forward to hearing how it flys

I am about to move but my new place has a brick out house with power to build in, plus a 3rd bedroom in the house to store models...this is still under negotiation with the wife :)

What did the parts fit like...did you need to amned anything?