hi scruffy the lanc i am building is the early plan with the one piece wing,so the nacelles and cowls are made of balsa and lite ply (pain in the arse to do)i am using 4 keda kd2217-20t 22A 860kv (220w) motors on 8inch 3 bladed props.(i have one of these motors on a 3d thing that goes mental!! so i know they are good) 11 quid each.the esc are total overkill at 60A but are opto and only 11 quid they are mounted just behind the motors in each nacelle.esc s are all y-leaded together and all motors start all together and run up nice.(nearly pulls the wing out of your hand)each motor runs off a 3cell 2250mah lipoly.yesterday started sprayin the fus,next week may get a bit more done but my leg is now ok and work are starting ring me up about going back.i shall try and do some photos for you sometime cheers bill