Jump to content

bees

Members
  • Posts

    181
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

bees's Achievements

2

Reputation

  1. Hi, Never got that far regarding flying, made a right mess of the wing so scrapped the build altogether.
  2. Hi, Having no success with the A10 iam now wondering which of the mini jets would be the best to build regarding hand launching and flying. Thank you for any suggestions.
  3. I also need some advice regarding CG, hang angle. I have drilled a hole through the mast at the recommended CG and have inserted some string to hang the Panther, is this the correct method. At the moment the Panther is tail heavy at the moment.
  4. In the process of building one as well, Could you be so kind as to say what specs regarding motor,esc,batt you have used.
  5. Is that a Sig Wonder i can see sitting on your bench.
  6. A bit off topic but this question is aimed at Rich. Finally got round to attaching my blades for my Panther and i have made a stupid mistake of making the blades so they turn clockwise. Save making a new set can i cut the blades down from 21/1/2 x 2/3/8 inch to 19/3/4 x 2/3/8 , Would this make a difference regarding lift. Thank you.
  7. Hi, Just started cutting the wing ribs but find it impossible to cut the ribs with the tab intact so i will have pack the trailing edge up when assembling the wing. The build is coming along fine and also started assembling the Nacelles.
  8. Just about got all the formers cut so next will be cutting the fus sides and start to assemble the fus.
  9. Hi, Anybody started building Tonys recent free plan the A10, I have started cutting the parts but it is rather intricate and time consuming but its keeping me occupied now the winter draws ever closer. There is usually a video on Tonys website but not seen one regarding the A10.
  10. Hi, Just been watching a earlier Panther vide regarding pitch and roll and i think i might be okay in fact maybe too much regarding roll.
  11. Hi, Seems like i can only get the same for my roll which is about 10/15 degrees will this also be enough. I have used standard size MG servos but they do not allow a lot of movement but i have just used a spare HS 81 mg for the rudder and have got a lot more movement. Thank you for any assistance.
  12. Have i got enough up elevator, I would say about 10/15 degrees. Thank you 20210918_185421.mp4
  13. Looking at the picture i realised that it is not going to work.Can anybody reccomend a suitable replacement. Thank you
  14. Hi, Found this in my junk box from some gearbox. would this be suitable for my Panther using a collet to secure the plate. Thank you.
  15. okay, have finished the blades as stated on the plan. Thank you.
×
×
  • Create New...