Peter Webster

1. Sussex Model Centre 2.Sussex Model Centre

Hi Stephen, these are my dims' Top wing 4'101/2" Bottom wing straight across 3'7" Tail 2'2" Fuselage 3'3" The construction is as you describe.

Hi Stephen,   If you need a new cowl the company Carbon Copy produce a good range. Their Galaxy Domino cowl will fit and is very close in design. It is slightly different on the bottom but it is of no importance. Follow the link. http://www.carboncopyuk.com/acatalog/Galaxy_Models.html

Hi Stephen, hope this helps

Hi Stephen,   The engine does not have any down thrust allowance but there is 2 degrees right. As viewed from the front the engine is shown rotated 15 degrees from horizontal.  That is in an approx 10 O clock position. The rotation is about the horizontal / vertical line. The vertical being in the centre and horizontal 76mm above the bottom of the fire wall. I hope this helps.   Peter

Hi Stephen, I don't think my first reply got through so I am sending the information again. The model is designed for a .61 two stroke or near that size or a .70-.75 four stroke. I have just replaced my 2 stroke with a Thunder Tigre .75. It sounds good and flies well. Control Throws. Aileron 10mm up 6mm down. Elevator 19mm up and down. Rudder 22mm each way. Hope this helps.  

Hi Stephen,   The model is designed for a .61 two stroke or .70-.75 four stroke. I have just changed to a .75 Thunder Tigre four stroke which sounds good and flies well. The throws are Aileron and Elevator 20mm both ways and Rudder 15mm both ways.

Hi Stephen,   I have made this Super Tigre model from the original kit and have the plans. The C of G is 145mm from the front edge of the top wing. Hope this helps.

please include me in the November draw

Please include me in the draw

Please include me in the October draw

Please include me in the draw.

Please include me in the September draw

Please include me in the July draw

Please include me in the June draw