Terry Meakin
-
Posts
11 -
Joined
-
Last visited
Never
Terry Meakin's Achievements
0
Reputation
-
Terry Meakin joined the community
-
-
-
Hi Can't help with the part 2 plans I'm afraid, I had the same problem by the time it came to making it. The solution was to use the pictures in the article and some careful measurements to come up with a 'best guess' at it, e.g. if the tailplane width measured 25% of the wingspan in the picture then the tailplane was made that size. The result was a model which flew on rails straight off the ground the first time and which has been my son's favourite plane in the 2+ years he has been flying it. Just about the only thing he hasn't done with it is prop hang it. CofG is shown on the first plans as 7 cm back from the leading edge. Here are a couple if pictures in case they help. Terry
-
-
-
-
in the black stripe on the left wing - viewed from behind
Terry Meakin posted a gallery image in Member Albums
-
The tail logo - left and right hand versions used.
Terry Meakin posted a gallery image in Member Albums
-
Hi Came across this thread and couldn't resist joining in. I've recently finished my Feugray and am just waiting for some decent weather to first-fly it but thought I'd post a couple of pictures of the finished article. It's powered by a J'en 37 which fits right inside the cowl as you can see with just a small hole for the glow start - a really tidy installation. In the background, the one nearest the Feugrys tail with the Yosemite Sam cartoon on the side is a Lil' Bandit and the tail with blue and yellow rays on belongs to a Cap 21 - along with the white wing with Mudry on top and the red trailing edge. Both are favourite planes of me and my son so can't wait to fly the new one. Thanks Peter. Edited By Terry Meakin on 07/04/2010 20:03:40 Edited By Terry Meakin on 07/04/2010 20:05:35
-
-
