Richie P

A buggy thing sounds good but will i get enough power to get her off the ground,from what im told i will need good ground speed to get any lift

Thanks ady as i am a country member room is not a problemm what i am finding is there is so little information coming back from this thread,at the moment i think is it all worth it, and as i dont have a club this is the only place i can look, by the way i have also been intouch with models shops with no success.

Thanks adrian thats a start. There dont seem to be a lot of intrest in bungee systems.

Can anyone point me in the right direction.i have a cml bae hawk edf the fiberglass version auw of 2lb 13oz and i need a bungee launcher to get it in the air. Where can i buy one or even the bits to make one. I am at a loss here as i have never seen or heard of them till today (sheltered life) i also need to know how to set it up? so all the help you can give would no go amiss ta richie

i would like to see the bristol brabazon

i have a flycamone v3 core and i am having trouble getting it to work with my spektrum dx6i. i have a rx cable connected to the camera but can only raise the camera eye a little way out of the main unit , not even enough to pan the head. i have used all the adjustment allowed to me with the transmitter but it's still the same. i am intouch with the dealer to try to  resolve this, has anyone had the same problem? or advice would be greatful thanks richie

thanks bert i will give them a ring as i have now found the parts have been numbered wrong and thats why i failed to put them togather, so i need to clarify them

thanks martyn , not having much luck here am i

thanks andy i looked as far as i can withgout success it seems there were a lot or priory lancs build in 2003/4/5 in america believe it or not, and i have e-mailed a lot of them but nothing

has anyone out there got plans on a priory lancaster as they are not in the kit these days which i find strange, and without help i cannot proceed. i find i am stuck putting the nacells together thanks richie

if you put a bit of vaseline arround the thread there will be no more stuck tops, and i also once finished  put the bottle upright give it a light squeese and wipe the dredded little drop off the top with a paper towel and hay presto no more blocked nozzel by the way haven't laughed so much in a long time with some of the replies you got, think that's what makes these forums brill richie.p

hi all         i have bought 4 jp 480 brushed motors to put in my lancaster with a 40amp speed controller as per instructions, i was then advised to put  two speed controllers in at 30 amp each, one for the outer motors and the other for the inner, the wireing loom that came with the model is 6awg and if i put two speed controllers in it maens doubleling up on wires, but the channel in the wings is not deep enough to take them, the advice i need is do i stick to the instructions and put all four motors into one speed controller or split them, and if i do split can i reduce the wireing to fit into the channels or do i make the channels deeper which might weakening the wings thanks             richie

thanks for the replys going to go through them all will let you know what happens richie

i am looking for a 6x4 or 6x5 3 bladed prop to fit an electric 480 motor 2.3 that will be used on a priory lancaster the ones i am finding are only used with ic engines, i would be greatfull for any leads                                                                richie p 

thanks timbo i thought you might pick up on this one, i was thinking of putting in a solid carbon rod to replace the tube for extra strength but you think there might be a weekness where i cut the hole for the servo.

hi everyone, i am going to fit ailerons to my easy star, can anyone tell me if i need to increase the size of the rudder ,if so should it be a set size. thanks richie p

cable ties such a simple idea, these are the kind of ideas i was looking for thanks lads

i would be interested to see if modelers have any pictures or ideas on how they fasten down their batteries ect in their model, i'm not a model builder but a foamie and like most people i just stick the battery in with velcro, there are a lot of forces going on up there and it's only time i geuss before the velcro breaks down or forces unattach my gear, i'm sure there are modelers out there with some ingenious ideas they would like tp pass on.  richie p

richard how did you fix it into the tube, and what length was it or weight

thanks john now you mention it i did read somewhere to do just that, you'v jogged my memory, i will do that. i have been flying the easystar for a while, and now i have  the easyglider, my plans for the easystar is to put alerons on her just to experiment and see what happens,then add weight for a nice strong windy day, again to see what happens, but as eric as siad it could be splat

brendan give als hobbies a ring in milton keynes they will have what you want. their add is at the top of this page on the right

i am still going down the video line "sorry"

well i flew today and thats my last until it warms up -3 on that hill, six minutes into the flight and i was so cold i had to land, until then my flying is going to consist of looking through the rcm&e videos, that should take me near to  warmer clims   happy new year to all and rcm&e

they'v  stopped selling the easy fly, not too soon eather had nothing but trouble with mine, it's what you get if you try to cut corners, now have the multiplex easy glider, what a difference. as for the prop sorry can't help i binned it along with the rest

i bought the spectrum dx6i only because the futaba offered came in at £134.95 with servoes i don't need , so at £89.95 i just saved money that will go on something else