Capt Kremen Posted January 25, 2011 Share Posted January 25, 2011 Unless I'm missing something .... On a MODE 2 set-up DX8 Tx (Throttle/RUDDER functions on left stick). Why is the Rudder Dual rate switch above the right-hand stick? Is it OK to extend the existing leads, (as supplied - very short and soldered to the circuit board and toggle switches), so that the switch function can be swapped over i.e. Rudder D/R above the left (Rudder) stick and 'F Mode' on the right-hand side? Quote Link to comment Share on other sites More sharing options...
Ultymate Posted January 25, 2011 Share Posted January 25, 2011 I'm not familiar with a Spektrum T/X at all but would have thought on a mid-range 8 Channel transmitter these days you would be able to assign dual rates and expo to whatever switch you like via the software Quote Link to comment Share on other sites More sharing options...
Capt Kremen Posted January 25, 2011 Author Share Posted January 25, 2011 Re-studied the DX8 user manual (BTW not the best for detail instruction); P15 only describes assigning Gear, Aux1, Aux 2 and left/right trimmers to different toggles/switches. As you say Ultymate, sets like my Multiplex EVO you can assign anything to anything! Quote Link to comment Share on other sites More sharing options...
Ultymate Posted January 25, 2011 Share Posted January 25, 2011 Have just looked at the manual online the pages you need to look at for assigning swiches are 23 and 24 Quote Link to comment Share on other sites More sharing options...
Capt Kremen Posted January 25, 2011 Author Share Posted January 25, 2011 Thanks Ultymate but still looking for detail on the F-Mode. Can see it mentioned on P16 for helis. I don't know whether the reassignment of Rudder dual rate to t'other toggle is 'global' or just for the current one model! I just enjoy flying not computer programming!!!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.