Mike Cotterill Posted April 21, 2011 Share Posted April 21, 2011 Hi, My TigerShark EDF unit, when run from a 3S1P 1500mA Li Po, goes into slow speed when the battery voltage drops to 11.6V. I think it may be set to 4S and shutting down at 4 x 2.9 volts = 11.6. Any idea on the setup modes for the controller that was sold with this jet ?:- http://www.rcuniverse.com/magazine/article_display.cfm?article_id=811 Unfortunately I can't identify the ESC now the model has been assembled - the model is approx 3 - 4 years old. Thanks MC Quote Link to comment Share on other sites More sharing options...
Plane Addict Posted April 29, 2011 Share Posted April 29, 2011 Your link says that there should be an electrify 25A esc. If that is correct, the part numer should be GPMM1820 and this could be the manual: http://manuals.hobbico.com/gpm/gpmm1800-1841-manual-v1_2.pdf Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.