Jon Goldsmith Posted June 27, 2012 Share Posted June 27, 2012 Have just built first tail-less glider and can't get elevon mixing to work: left-right stick moves surfaces up and down, back-forward stick moves surfaces opposite directions. Have plugged in servo leads into ch 1 and ch 2 as per manual and also tried plugs in "opposite" sockets but still wrong. Any ideas what will put things right? Jon G Quote Link to comment Share on other sites More sharing options...
Caveman Posted June 27, 2012 Share Posted June 27, 2012 As per the manual, connect the left wing servo to channel 1 and the right wing servo to channel 2. Then reverse the servo on the left wing - do the surfaces now move as expected? Make sure they move in the correct direction (not the opposite of what's required) - if not reset the left wing servo to normal and reverse the right wing one. G Quote Link to comment Share on other sites More sharing options...
J Myers III Posted June 29, 2012 Share Posted June 29, 2012 As Caveman said, it may just be as simple as reversing them. Edited By Ghost on 29/06/2012 19:00:44 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.