Mark Barnes Posted January 26, 2008 Share Posted January 26, 2008 Hi does anyone out there have, or knows where I can get hold of a spare rear needle valve assembly that can fit on my OS40LA, I had one of those unfortunate landings where the ground arrived far quicker than I expected!! Yeah I crashed!!This landing completely demolished my black horse twister and snapped off the nipples on the needle valve.The valve assembly is the black plastic type which fastens to the rear of the engine with a metal bracket. Any help is most appreciated.Mark. Quote Link to comment Share on other sites More sharing options...
Tim Mackey Posted January 26, 2008 Share Posted January 26, 2008 Have you tried either J/E or maybe John Haytree?or maybe hereor ripmax themselves? Quote Link to comment Share on other sites More sharing options...
Phil Claridge Posted January 28, 2008 Share Posted January 28, 2008 SMC do these needle valve and bracket about 17 quid Quote Link to comment Share on other sites More sharing options...
Mark Barnes Posted January 28, 2008 Author Share Posted January 28, 2008 Thanks for the leads guys I will check them out. Quote Link to comment Share on other sites More sharing options...
Mark Barnes Posted February 6, 2008 Author Share Posted February 6, 2008 Hi I managed to get one from my local model shop, at a very reasonable £4.99. Yet another reason for supporting your local model shops, Quote Link to comment Share on other sites More sharing options...
Grant Darnley Posted February 7, 2008 Share Posted February 7, 2008 Learn to land you, too much time catching those silly profile models Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.