wayne young Posted April 27, 2013 Share Posted April 27, 2013 Hi I need to replace my areial on my 8fg transmitter has any body done this I know there is a clip up the shaft some where to hold the wire in place but not sure where it is and how to open and close the clip many thanks wayne Quote Link to comment Share on other sites More sharing options...
Stephen Grigg Posted April 27, 2013 Share Posted April 27, 2013 Ive had mine changed once think its more complex than that. Quote Link to comment Share on other sites More sharing options...
Phil 9 Posted April 27, 2013 Share Posted April 27, 2013 I replaced mine and its not complicated but you do need careful as the coax cable and connectors are delicate. The replacement part came from hobbystores Edited By Phil 9 on 27/04/2013 13:19:37 Quote Link to comment Share on other sites More sharing options...
Phil 9 Posted April 27, 2013 Share Posted April 27, 2013 the clip holds the antenna in use pliers to release the old mast the new one can be pushed in use pliers and pull straight to remove the coax Quote Link to comment Share on other sites More sharing options...
wayne young Posted April 27, 2013 Author Share Posted April 27, 2013 Many thanks for that phil 9 have opened up the back and had a look.. Looks ok a job again many thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.