chris sibson Posted June 3, 2013 Share Posted June 3, 2013 Had my fantom for a while. lovely EDF very stable and forgiving, but....a bit...slow. Anyone have any suggestions for a replacement motor/ fan. on board is the stock 5100KV job. I'd prefer to continue with the 3s lipo setup as well ( as I have many! ).Thanks in advance! Quote Link to comment Share on other sites More sharing options...
chris edwards 3 Posted June 3, 2013 Share Posted June 3, 2013 hi chris i have a phase 3 fantom and i thought the same about the speed so i upgraded it to a 4s setup with a 64mm 5 bladed fan on it. went like a balistic missile until the fan unit exploded. if you want to keep it on a 3s set up i would try this fan unit with this motor but definatly upgrade the esc from the 30amp unit in the fantom to a 40 or 50amp unit to prevent it from burning out. chris Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.