Mark Hancock Posted February 22, 2014 Share Posted February 22, 2014 Can anyone out there tell me where I can get some 8-32 UNC threaded bar/studding from in the UK? Its so that it can be put through a rudder and Dubro arms can be fitted. 4mm is a little small and 5mm would not leave much if drilled and tapped. Thanks Quote Link to comment Share on other sites More sharing options...
Masher Posted February 22, 2014 Share Posted February 22, 2014 Model fixings is always the first port of call on this sort of item. However it doesn't look like they do this! They would probably be able to help though - worst case they can supply a die to cut your own thread 2.5 inch bolts bottom of this page which may be long enough? Edited By Masher on 22/02/2014 09:47:16 Quote Link to comment Share on other sites More sharing options...
Mark Hancock Posted February 22, 2014 Author Share Posted February 22, 2014 Thanks tried them first but die might be a good idea.It needs to be 6 -8 inches long. Thanks Edited By Mark Hancock on 22/02/2014 09:57:19 Quote Link to comment Share on other sites More sharing options...
Braddock, VC Posted February 22, 2014 Share Posted February 22, 2014 Just a thought, why not buy some of slec's adjustable control horns, maybe easier in the long run http://www.slecuk.com/catalogue/Control-Horns.html Quote Link to comment Share on other sites More sharing options...
Mark Hancock Posted February 22, 2014 Author Share Posted February 22, 2014 Thanks but the plane is a little big for those Edited By Mark Hancock on 22/02/2014 15:37:43 Quote Link to comment Share on other sites More sharing options...
Braddock, VC Posted February 23, 2014 Share Posted February 23, 2014 All I can say is don't lose that plane in a field of oilseed rape - one of my wot4s in similar colour took two days to find when it landed out in one. Edited By Braddock, VC on 23/02/2014 10:15:18 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.