Taranis Tx with Spektrum/Orange Rx's

[andyh]

does anyone have any experience of using the Taranis with Spekky/Orange Rx's? in particular with this OrangeRX module:

**LINK**

thanks

Andy

[Steve Balaam]

Hi Andy

I've used this module and bound and flown it to Spectrum RX's no problem havn't tried it with Orange RX's.

The Taranis TX needs to be set to work with the External Module this is found within the individual model memory you wish to use the module with. Only downside is the second aerial sticking out of the back it.

Hope this helps

Steve B

[Phil Green]

... as previously posted, be very careful not to mix Orange and Frsky aerials.

[andyh]

Posted by Steve Balaam on 27/05/2014 19:36:38:I've used this module and bound and flown it to Spectrum RX's no problem havn't tried it with Orange RX's.

The Taranis TX needs to be set to work with the External Module this is found within the individual model memory you wish to use the module with. Only downside is the second aerial sticking out of the back it.

thanks Steve

have you had any issues with setting the operating mode?:

https://www.youtube.com/watch?v=H_ykQujuLxA#t=1m59s

 

does this need setting every time you select a model or is it stored in some way?

Edited By andyh on 27/05/2014 20:02:47

[andyh]

Posted by Phil Green on 27/05/2014 19:40:51:

... as previously posted, be very careful not to mix Orange and Frsky aerials.

thanks Phil, I had seen that. here's a link to your post:

**LINK**

just trying to get everything FrSky--Spektrum/Orange in one place - wading through the main user chat thread is a bit of a mission!