Diamond Geezer Posted April 14, 2007 Share Posted April 14, 2007 Hi can anyone tell me which servo plugs into which number,ie batt to batt number1 to?and so on thx Geoff Quote Link to comment Share on other sites More sharing options...
winchweight Posted April 14, 2007 Share Posted April 14, 2007 Usually the battery goes into the slot marked B, or any spare channel, or via a splitter lead. Mode 2 as follows;Ch1 = AileronCh2 = ElevatorCh3 = ThrottleCh4 = RudderCh5 = GearCh6 = Flap?/2nd Aileron ServoCh7 = WhateverCh8 = Whatever / BatteryHope this helps Quote Link to comment Share on other sites More sharing options...
Essjay Posted April 14, 2007 Share Posted April 14, 2007 Geezer,Shaun is correct in what he says, if you are using Futaba gear, however for any beginners JR is slightly different. They do help by actually writing what the channel is next to the socket on the receiver, but they translate like this:Futaba - JRCh1=Aileron - Ch1= ThrottleCh2=Elevator - Ch2= AileronCh3=Throttle - Ch3= ElevatorAll other channels are the same for both types. I assume as you are talking numbers then you are using Futaba gear. Quote Link to comment Share on other sites More sharing options...
Diamond Geezer Posted April 14, 2007 Author Share Posted April 14, 2007 thx for the help guys and yes i'm using futaba Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.