Skippers Walker Posted July 11, 2019 Share Posted July 11, 2019 I've recently purchased The Futaba 2.4 Ghz T6L basic TX plus the R3106GF Receiver. Please can anyone suggest a suitable compatible receiver that would also work with this set up? Looking on the Hobbyking site for instance just adds to my confusion about the choice of cheaper RXs avilable! SW Quote Link to comment Share on other sites More sharing options...
CARPERFECT Posted July 11, 2019 Share Posted July 11, 2019 Nobody makes compatible T-FHSS receivers. well not yet. But the T6L does both T-FHSS and S-FHSS. On hobbyking you can get the orange and corona receivers. both work well Quote Link to comment Share on other sites More sharing options...
CARPERFECT Posted July 11, 2019 Share Posted July 11, 2019 Plus FR Sky make one called Delta 8. I use the Orange RSF08SB + CORONA R6SF AND THE DELTA 8. All available from Hobby King Quote Link to comment Share on other sites More sharing options...
Skippers Walker Posted July 11, 2019 Author Share Posted July 11, 2019 Thanks for the speedy response to my post, very helpful too. Having just left 35Mhz behind, well almost, I'm on a steep learning curve with regards to 2.4 Ghz kit. regards SW Quote Link to comment Share on other sites More sharing options...
Julian Thacker Posted July 19, 2019 Share Posted July 19, 2019 Just seen this. Why would you pay between £37 and £54 on Ebay for the Delta 8 when the 3106 is available from model shops for around £25? The orange is £20 from HK but if I were you I would stick with Futaba rxs at these prices. I have used a 3106 for 18 months now just to see if it was any good and so far it has been 100% reliable. Just get that single antenna out in the open away from shielding objects. Oh, its easier to bind too as it t-fhss but without the telemetry. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.