Jonathan M Posted May 27, 2020 Share Posted May 27, 2020 Is Plastic-Kote a suitable (acrylic?) spray to use on EPO foam? Otherwise, are there any recommended acrylic spray paints for this particular foam... which aren't quite so expensive!? Quote Link to comment Share on other sites More sharing options...
Alan Gorham_ Posted May 27, 2020 Share Posted May 27, 2020 I've done it...I wiped the model over with Multiplex Elapor primer first. It was a few years ago now, so my memories might be hazy. It was prone to rubbing off (eg if resting on something in the car on the way to fly) or if the foam flexed a bit. Other than that no problems, but as with most spray paint on any foam, avoid holding the can too close to the foam in case the propellant reacts with the foam. Edited By Alan Gorham_ on 27/05/2020 15:43:12 Quote Link to comment Share on other sites More sharing options...
Jonathan M Posted May 27, 2020 Author Share Posted May 27, 2020 Cheers for that Alan. Jon Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.