Stephen Jones Posted September 19, 2022 Author Share Posted September 19, 2022 Hello again, The templates are now available to download here if you wish to build this glider. You will need some Balsa TE Or make some as I did from 6x40mm Balsa sanded to shape and length. You will also need some thin steel wire for the push rods, Control horns, Foam safe glue, Hot Melt glue Two 6g servos, A small 4ch Rx and a small battery I used a 18650 cell. The all up weight for this one was 215g possible due to the stickers I added. The balanced point is on the Leading Edge of the wing tips. Enjoy, It is a fun model to fly and will not break the bank. DownLoad Gull Wing Glider Templates Steve. Quote Link to comment Share on other sites More sharing options...
Stephen Jones Posted September 21, 2022 Author Share Posted September 21, 2022 Here is the 1st test flight of the all Lidl gliders conversion into a Gull wing glider. No motor just slope gliding. Steve Quote Link to comment Share on other sites More sharing options...
Stephen Jones Posted September 25, 2022 Author Share Posted September 25, 2022 And for those that prefer to watch a build video here is Part 1 and Part2. Steve. Quote Link to comment Share on other sites More sharing options...
MattyB Posted September 26, 2022 Share Posted September 26, 2022 Nice work. Reminds me of the Black Diamond from the early 90s, they flew quite well as I remember - the plan is still on Outerzone… https://outerzone.co.uk/plan_details.asp?ID=10745 Quote Link to comment Share on other sites More sharing options...
Stephen Jones Posted September 26, 2022 Author Share Posted September 26, 2022 14 hours ago, MattyB said: Nice work. Reminds me of the Black Diamond from the early 90s, they flew quite well as I remember - the plan is still on Outerzone… https://outerzone.co.uk/plan_details.asp?ID=10745 Hi, Matt this is indeed the very model that inspired my Lidl build.👍 Steve. Quote Link to comment Share on other sites More sharing options...
Stephen Jones Posted September 27, 2022 Author Share Posted September 27, 2022 And here is the final part 3 of my build video. Steve. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.