911hillclimber Posted February 12, 2023 Share Posted February 12, 2023 Last used the Sim about a year ago, hoping to fly next week so thought a few hours on the SIM would be a good idea. I have a DX6 Spektrum as used before, linked it all up and the Aerp says it cannot find the Tx or even the USB lead. The dongal(?) lights up and is set where it was, 2.AERO Get the same message with the TX on or off. On the screen, when FLY is selected the model shows on the field on tick-over, the TX joy sticks have no influence on the plane. Any ideas what I'm doing wrong please? Quote Link to comment Share on other sites More sharing options...
Denis Watkins Posted February 12, 2023 Share Posted February 12, 2023 Tx Always OFF, but fully charged. With the computer OFF, plug in the peripherals ready, in the USB that you used before, and stress again, the Tx is OFF. Switch the Computer ON The Tx will come ON Let the computer settle to the Home screen,then Start Up Aero Pro Quote Link to comment Share on other sites More sharing options...
911hillclimber Posted February 12, 2023 Author Share Posted February 12, 2023 Thank you Denis, will try that first thing tomorrow morning. Fingers crossed. Graham. Quote Link to comment Share on other sites More sharing options...
911hillclimber Posted February 12, 2023 Author Share Posted February 12, 2023 Just tried the process, still the same. All comes on but states the Tx or a joystick not found, thus the tx controls do nothing, no responses on the simulator. I presume it is done for, but was working well 12 months ago. Quote Link to comment Share on other sites More sharing options...
Denis Watkins Posted February 13, 2023 Share Posted February 13, 2023 Graham There are Diagnostics on the Aerosim site https://www.aerosimrc.com/en/faq.htm Quote Link to comment Share on other sites More sharing options...
911hillclimber Posted February 13, 2023 Author Share Posted February 13, 2023 Thank you very much Denis, all really helpful! However... Changed the Tx to 'Plane #5', my normal trainer is #3, and everyhing works! Had to reverse on the Simulator a few channels etc, but it all flies now. Off to the field with my Tx Buddy there tomorrow to try my new unblemished WOT4. Hope to come home with it in one piece. 1 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.