Frank Day Posted February 24 Share Posted February 24 Have a Multiplex sonic liner that I converted to brushless. I have a hankering to strap on a pair of EDF using the set up available from various A10 warthog models ranging from 50-80mm. Probably 50 -64mm will do, havent looked at spec of any yet. The rear fuzz is perfect for some foam bashing and just bond in the edf unit Main question is thrust line, keep at the same angle etc as the oem set up or do I need to change this. Quote Link to comment Share on other sites More sharing options...
Frank Day Posted February 24 Author Share Posted February 24 Just had a quick read, One suggestion is that the centre of the edf should be at 90deg to the CG. That would be quite a bit of down thrust. Others suggest setting it at 0 deg. I can see that ) may cause a dive. I guess they should be mounted as close as possible to the fuzz to reduce the angle. Expert advice more than welcome Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.