Neil67 Posted March 28 Share Posted March 28 I have bent the shaft in the supplied motor of my acrowot foame, but can't get the grub screw out to replace the shaft. Alan key just too small and not strong enough. Anybody have a hack for removing the grub screw. If this fails I have a 1050Kv motor (supplied motor 820Kv). Will this work or will I lose power. Neil Quote Link to comment Share on other sites More sharing options...
Shaun Walsh Posted March 28 Share Posted March 28 2 minutes ago, Neil67 said: I have bent the shaft in the supplied motor of my acrowot foame, but can't get the grub screw out to replace the shaft. Alan key just too small and not strong enough. Anybody have a hack for removing the grub screw. If this fails I have a 1050Kv motor (supplied motor 820Kv). Will this work or will I lose power. Neil Can you provide more details on the 1050KV motor? You won't necessarily lose power but it may need a slightly smaller prop to avoid exceeding the current rating of the ESC. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.