Gemma Jane Posted March 13, 2009 Share Posted March 13, 2009 Hi all, AR7000 just returned by Horizon after the QC update. Turnigy 5-7.5A UBEC Wire removed from ESC as instructed Each restart the rx enters bind mode, it will bind successfully then work without problems. Remove the battery, replace it, back in bind mode and needs re-binding. I haven't left the bind plug in! Original bind was using a spare channel as the battery channel was occupied by the UBEC Advice please! Quote Link to comment Share on other sites More sharing options...
Tim Mackey Posted March 13, 2009 Share Posted March 13, 2009 You CANNOT bind with the bind plug inserted in any other socket than the battery socket. temprarily insert the UBEC or other supply into any other socket but NOT the bind plug. The procedure you have been doing means that it has never been properly bound, hence its desire to keep asking to be ! Quote Link to comment Share on other sites More sharing options...
Gemma Jane Posted March 13, 2009 Author Share Posted March 13, 2009 OOOOPS thanks Timbo, I shall go and do it properly Quote Link to comment Share on other sites More sharing options...
Tim Mackey Posted March 14, 2009 Share Posted March 14, 2009 Hi Gemma... did that sort it ? Quote Link to comment Share on other sites More sharing options...
ken anderson. Posted March 14, 2009 Share Posted March 14, 2009 get that man a pint.......................well done timbo.... ken anderson............. Quote Link to comment Share on other sites More sharing options...
Tim Mackey Posted March 14, 2009 Share Posted March 14, 2009 Ah but before the drinks start flowing.....did it solve the issue Ken ? Quote Link to comment Share on other sites More sharing options...
Gemma Jane Posted March 14, 2009 Author Share Posted March 14, 2009 Not had a chance to check Tim, new contract came in for work, I've disappeared under a pile of paper for a while! Quote Link to comment Share on other sites More sharing options...
ken anderson. Posted March 15, 2009 Share Posted March 15, 2009 sorry gemma-don't know what 'work' is--tied up my horse and hung up my spur's one year ago...................... ken anderson.................... Quote Link to comment Share on other sites More sharing options...
Gemma Jane Posted March 22, 2009 Author Share Posted March 22, 2009 I don't suffer too badly Ken, at most I work 6 months in the year so I can't complain. Just to confirm Tim was right as usual, now bound properly and the Sea Fury went for its first post accident flight today in far too windy conditions but I couldn't help it, had to see it fly again. Opted for a hand launch and belly in. How it managed to find the only pile of Alpaca poo in the whole field on landing is anyone guess. Glad to say all is well and I'm looking forward to many more flights thanks for the help Tim Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.