Dave Y Posted September 3, 2009 Share Posted September 3, 2009 Hi Folks, Recently ordered the 72" lanc plans/cnc/woodpack..can't wait to get started on it! I would like to do some research/reading first but can't seem to find a complete build thread on any forums. Does anyone have a link to a build thread for these plans? (I'm sure I saw one months back but didn't bookmark it!!) Cheers DaveEdited By David Yarrow on 03/09/2009 13:07:07 Quote Link to comment Share on other sites More sharing options...
Dave Y Posted September 16, 2009 Author Share Posted September 16, 2009 Hmm I guess there really isn't a complete build thread! I will have to do a thread when I start the build (once the camel is completed). Quote Link to comment Share on other sites More sharing options...
Stephen Grigg Posted September 16, 2009 Share Posted September 16, 2009 Hi David,the thread you need is titled,Bjorn 1:9 Scale Nijhuis lanc build Quote Link to comment Share on other sites More sharing options...
Dave Y Posted September 16, 2009 Author Share Posted September 16, 2009 Hiya, Sorry if i'm being dumb but isnt 1:9 scale bigger than 72"? (I hope so or the mrs will kill me when she see's the size of the thing!) Or is the kit the same just bigger? Or are my calcs completely wrong hehe Quote Link to comment Share on other sites More sharing options...
Stephen Grigg Posted September 16, 2009 Share Posted September 16, 2009 Havent a clue David,just found it saw it was a Nijhuis Lanc and reported in,good luck Quote Link to comment Share on other sites More sharing options...
Lloyd Ertel Posted March 3, 2010 Share Posted March 3, 2010 hi alli too am building a TN Lancaster and also noticed there was not real instructions. So I started a build thread on another site.. http://www.rcgroups.com/forums/showthread.php?t=1137895 I admit that i am no expert. and this is not the way to build one.. just MY WAY. if you all wanna look and add comments.. I would welcome it.. I have already made a few math mistakes. my engines i bought will pull 1400 gram... now times that by 4.. and you get over 5.6 KILOGRAMMS... i think i maybe able to hover this thing... dont worry i wont. will not even attempt it.. but i could use some advice on building it... has anybody put flaps on??? Quote Link to comment Share on other sites More sharing options...
Walts Posted March 7, 2010 Share Posted March 7, 2010 There was several build threads for the 72" T.N. Lanc running on RCMF.co.uk In fact, so many they were numbered by vol. Most were for the original version, there may still be some on there if you put it in the search, but you will have to wade through all our waffle and general chit chat in the threads! A chap called Mat (Mudflap) done a build of the newer version of the 72" Lanc on there, that one might be more worth a read and a lot easier going wading through it! Good luck. Walts. Quote Link to comment Share on other sites More sharing options...
Mudflap Posted April 4, 2010 Share Posted April 4, 2010 Hi Walts, It was the TN B17 I did a thread on, although I built the Lanc first I didn't do a thread, cos I wasn't on the tinternet Lloyd, I amd having trouble logging into Groups, but there are piccys on TN's website of our birds. Mud Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.