Speedster
-
Posts
586 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Blogs
Gallery
Calendar
Downloads
Everything posted by Speedster
-
Just do that I think it is a bit better than just tape it to the wing, as here on my 5 meter Carrera SB10 Cheers Soren
-
The Mobius holder is made of 10 mm balsa, 34 cm long and 10 cm high You can put a counter weight on the other wing, but normally only a few click on the trim is ok on a 2,5 meter plane. I have flown it on a Lidl glider but on such a small glider a counter weight is nice, Cheers Soren Edited By Speedster on 18/10/2020 17:56:40
-
-
-
-
-
Vintage glider day at my RC club yesterday Cheers Soren
-
Towing a 6 meter/15 kg Phoenix Ka8 with my Spacewalker with 35 cc DLE engine Cheers Soren
-
6 meter Ka8 maiden motor flight
-
Easy Go to the mix screen, Then you set in the preset; Elev- flap Cheers Soren
-
Schlepp und schnack, Kiel Germany this weekend Cheers Soren
-
6 Meter Phoenix Ka8 and Wilga and Pawnee, and a drone Cheers Soren
-
Gliding video thread
Speedster replied to Lee Morgan's topic in Gliders and Gliding - General Discussion
6 meter Phoenix Ka8 Testing my wing reinforcement Cheers Soren -
Tow and talk at my RC club 19-21 June 2020 Cheers Soren
-
At the beach yesterday Cheers Soren
-
2 years ago a guy from my club ordered a ASK18 in Jan. and he got the kit in Aug. (Without canopy and wood for tailplane) It came after 14 month RCnetwork has a tread about RCeurope **LINK** Good luck
-
Posted by Chris Walby on 04/06/2020 08:16:48: The DX8 gen 1 and DX gen 2 model files are not transferrable, so you have to reprogram all of your models back in. At this webpage you can change the DX8 g1 to G2 files, and it's working great **LINK** Just get the DX 9 Cheers Soren
-
Who says flying thermal soarers is boring?
Speedster replied to FilmBuff's topic in Gliders and Gliding - General Discussion
Denmark today Nice thermals and just wind enough to do some treeline DS with my Arthobby Silent 3,4 M Cheers Soren -
You have to adjust the flaps throw in the flt modes you want them to work so: 1 You go to Camber system. 2 set the FLT mode switch to land, and adjust the flaps throw as you want. Cheers Soren
-
My 7,15 M ASW22 with new scratch build winglets Flying at the RC club evening Cheers Soren
-
Program DX G2 If you program a flying wing with 4 flap wing, then set it up as a glider with 2 ailerons and V tail. Outer flaps are ailerons and inner flaps is the elevator/rudder Then a mix: Aileron- rudder, to get the elevators to go as ailerons. Then a mix: elevator- L aileron, to get the ailerons to go as elevator. And then set the Dual rate for the rudder to % to disable the rudder stick. At camber system you adjust the aileron up in Crowbrake and after this preset Mix: Flap – elevator, here you set the elevator down in the Crow, after this you go to camber system and just the offset so that both aileron and elevator start to move at the same time when using the throttle stick. If it is a 4 flap flying wing you can set the crow brake on a switch and set it up in flight mode in the Camber preset.
-
Program DX G2 Camber system: Glider, here you adjust landing flaps/ crow brake and which switch or stick you will use for it. (In crow brake not more up aileron when using the crowbrake that when using the ailerons the aileron that going down must go down to neutral, in this way you still have good aileron control. And if you use flight modes you have to set it in all FLT modes you use. MIX: Flaps- elevator, here you adjust the elevator compensation when using the landing flaps (Camber system) and adjust the offset so that the elevator start moving when the flaps is moving when using the throttle stick to control it. 2 mm down elevator when using the flaps is a good starting point. Mix: Ailerons- flaps, here you adjust all span ailerons Elevator- flaps, here you adjust the Aileron –rudder, here you adjust snap flaps Aileron –rudder, here you adjust as described Set up the spoken Flight modes and switch change sounds Set up telemetry in auto config. Motor planes with flaps: you can go to elevator dual rate and set the switch to flt mode/ flaps switch and then set it so you still have full up elevator movement, when using the flaps and have set down elevator compensation, in this way you still have enough up elevator to pull up in the landing when using the flaps Set the timer
-
Just use the glider set up My easy set up on the Spektrum: Program DX G2 Select plane type: Chose always glider type if you want to use spoilerons or flaps. Use motorplane if it is a flying Wing. Select wing type. Activate motor if it is a motor plane or motor glider. Trim set up: set to FL mode F mode, Activate switch 1, 2, 3, for flaps on motorplane, maybe more if you want to use more than 3 flight modes on a glider. Put in the servo plugs in the receiver. Use the monitor to see this.. It can change for each wing type Servo set up: Set the right directions and sub trim the servos. Set the travel for the servos Ailerons differential, not too much because this can be a problem when using spoilerons and flaps Dual rate and expo, 50% on ailerons and 40% on elevator and rudder is a good start. Camber preset: Motor plane/Glider, here you adjust: Motor plane: Flaps up/ take off flaps/ landing flaps and elevator compensation and how fast the flaps move. Glider:Flight modes as Thermal /cruise/speed and how fast it changes
-
My jolly video of Santa flying his biplane!
Speedster replied to Cliff 1959's topic in The Video Channel
And in a 6 meter glider Cheers Soren -
If you program a flying wing with 4 flap wing, then set it up as a glider with 2 ailerons and V tail. Outer flaps are ailerons and inner flaps is the elevator/rudder Then a mix: Aileron- rudder, to get the elevators to go as ailerons. Then a mix: elevator- L aileron, to get the ailerons to go as elevator. And then set the Dual rate for the rudder to % to disable the rudder stick. At camber system you adjust the aileron up in Crowbrake and after this preset Mix: Flap – elevator, here you set the elevator down in the Crow, after this you go to camber system and just the offset so that both aileron and elevator start to move at the same time when using the throttle stick. If it is a 4 flap flying wing you can set the crow brake on a switch and set it up in flight mode in the Camber preset. Edited By Speedster on 29/11/2019 21:48:01
