Mark Kettle 1

A good timed shot Shona.

Nice Rosemary, it reminds me of this pair.

Richard, I think this has been missed by the PSSA forum regulars. Have you finished the JP build ?

A good link, thanks John. It hand launched very easy.

A bit of flying from the 'Fly In' September 2019 Sat and Sun 7th - 8th. Peter Garsden's Camberra designed by Andy Blackburn. Sarik plan :- https://www.sarikhobbies.com/product/english-electric-canberra-b-2-t-4-43-3-plan-copy/ Enjoy the Video :- remember to like and Subscribe.

I'm still checking Chris (1st time on new forum layout ), it's took me a while to find things etc.

Andy, for stock availability I've just checked around the London area form B&Q and there's up to 90 packs of 6mm in stock. Also checked for 5mm here at 'Paper Gourmet' **LINK** Andy, I've purchased from the above supplier. I made this model from a 'one sheet pattern ' - of the 5mm foam board. Alpha Jet at 20 inch wing span.   Test flown in the garden prior to the side engine pods attached and radio gear installed for glider flying off the local slope.   Edited By Mark Kettle 1 on 18/01/2021 10:21:18

Yes, Diall Polystyrene Insulation board Size's (L)0.8m (W)0.6m in thickness's of - 3mm - 6mm -9mm. The board plan dimensions in inches is 31 1/2 times 23 1/2, the 6mm pack, I think there is 8 sheets in the pack, it's best to check the stock in each store on line before you go down to pick it up, or order on line. B & Q stock it. **LINK** The foam works and models really well just like depron. I've purchased many packs in the sizes -3mm -6mm and the 9mm. I mainly glue it together with hot glue, however I've just purchased my first supply of UHU por. Current foam project. A neighbour had these blue wings, he lost the fuselage in a spiral dive many years ago, it was the Hitec Sky Scout version, I was more than happy to build him a fuselage in the current lockdown. Above an old advert from the pages of RCME (2003 ) for the original rudder elevator and motor control model. It's been test flown and he's purchased a new transmitter for his 8 year old son to hopefully fly it this spring. It happens his dad really enjoyed flying it again, so I set to to build him a fuselage and the wing I'm still working on.