ADRIAN BURGE

The length of a spar is 18.5 ins. Does that sound about right? I notice that there is a lot of wasted space on the drawings, so I will see if with a bit of juggling around it will all fit on the three boards. I am drawing it up in CAD , hopefully to laser cut.

Is the size of the original pdf`s 20 x 30 ins each, that is what Acrobat Reader states. so that means one per foamboard. Six boards in total. If that is the case how was the cost of the airframe under £10 as stated in BMFA news?

Sorted now. Used a CAD program and they seem to be the correct size. "2 to a foamboard, 3 boards in total. Eventually hope to cut on laser.

Martin, Thanks for the plan link. have downloaded 6 pdf`s Cannot find any dimensions. Loading into Seif Draw they come out at 60 x 20 ins each pdf which is way to big. Larger than one sheet of foamboard, which is approx. 23 x 33 ins. Thought they might have been the correct size. The Flitest plans always had a scale ruler on the sheet. How did you get the correct size. Adrian

Have been building foamboard models for some time now. Mainly from FliteTest plans. I was interested in the Me106 featured in the BMFA mag. Try as I might I cannot locate the plan. It is supposed to be in the forum, I have found all the build details but no plan. Have you a link you could post or maybe upload the plan.

Thanks Chris, Lets hope we get some better weather this year Regards, Adrian

Are the 4 fly ins usually hosted by the NLMFC at Baldock taking place this year? Have been unable to find any publicity announcements. The Scale event is normally at the beginning of June, but there is nothing in the events calendar in the latest R.C.M&E Adrian

Thanks for that

Are the templates for the Pilot Figure for the Flycatcher free plan in the August 2015 RCM&E still on the website or does anyone have a copy they could send me? I have the plan but the pilot was a download which I am unable to find. Thanks.

Thanks for the quick replies. Ref. the answer from Denis, it is easy to assign a switch. The difficulty is setting a 3 way up for dual rates. I like the solution from Steve. Is it possible to give me a quick instruction for setting it up. I have been struggling with this problem for a couple of days and my brain is getting a bit fuddled, I`m seeing Aurora screens in my sleep Adrian

When using the Glider model option the default for the throttle is a switch. No problem there if you want a straight on/off. How to you select dual rates on Switch "C" to give Off, 50% and 100% throttle settings? You cannot get individual switches in the D/R menu. I would think that this option is not impossible. The Manual is of no help at all

Any ideas on the availability of a 40mm Fan for a 1.5mm shaft. Either push on or with an adaptor. It would appear that the GWS item is no longer available

I paid £45 for the subscription which is the price quoted in RCM&E. This does not appear to be a discounted price. Once again I state that the Free Gift Offer is not stated as being New Subscribers Only!

I have never had a problem with free gifts on renewal before, Have received several over the past years. To quote from the magazine subscription page. "Receive a free Prolux Heat Sealing Iron when you subscribe today" Nothing about new subscriptions only.

Is there a problem with the Prolux heat sealing Iron offer that was published in the September RCM&E. I renewed my subs on the 3 Sept and never received the iron. Phoned this morning and was told that because of a "system upgrade" it could not be sorted until the 11 Oct Anyone any idea what is going on?