BILL PETTIT
-
Posts
306 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Calendar
Downloads
Everything posted by BILL PETTIT
-
https://www.towerhobbies.com/cgi-bin/wti0001p?I=GPMG0510&gclid=EAIaIQobChMIqrCz6_qa6wIVB2yGCh3KvwmAEAQYDiABEgJlX_D_BwE this on the other side of the pond , but it gives you an idea of what to look for over yonder..... Bill
-
Oh baby Don I am so looking forward to seeing a short video of the rotor in action, I have been struggling with my version. Your panther looks AWSOME! Bill
-
This such sad news tom was so very delicated to this sport and so helpful to all around the world. RIP Tom, from Bill on the other side of the pond....
-
Hi all: You fellows are correct about the blade placement , the set I have on the atom is a plate from another project with much smaller blades attached just used to show a completed Atom I have to cut the smaller plate for the Atom. You guys don't let anything slip by do you, That's good it gives everyones maiden a better chance for SUCCESS ! Bill
-
Thanks all: Tomas that is a nice tidy set up looking close at that one ! Bill
-
I put in my ESC and battery and ran out of room sill need to add a Reciver, I'm thinking the battery might go good on the belly outside. What is everybody using for a receiver and where are you getting them? I am running low on usable Orange Boxes. Is there something new and improved now days? Bill
-
-
-
Well I too have a MG90 that I well believe had something to do with my las flight of the alloy verson of my Mantis it had way too much slop yet still functioned but it also locked up in full deflection and had to forced back by hand. I am pulling both and replacing with new. Bill SORRY WRONG NUMBER MINE WERE MG946 !! way too big for the Atom. Lol.o Edited By BILL PETTIT on 14/01/2015 15:30:12
-
Terry: I use a hot melt glue stick gun ( on low heat) . Bill
-
-
-
Terry my tailplane is made from blue fan fold building insulation maybe 3/16" thick and very light, cheap as chips to replace when needed. Bill I also have pink fan fold it is thicker. Why do the pictures come out in the wrong order? Edited By BILL PETTIT on 08/01/2015 21:05:19 Edited By BILL PETTIT on 08/01/2015 21:07:46 Edited By BILL PETTIT on 08/01/2015 21:11:29
-
oops double post,,fat fingers. Bill Edited By BILL PETTIT on 08/01/2015 17:05:32
-
Chas: Many of the Atoms shown here and my own have the spreader piece between the boom rods up tight to the rear of the fuselage, this might take some of that flexing out of you booms. Just a thought. I like the thought of a larger Atom maybe you could call it the Molecule lol I crack myself up some times. Bill
-
Well it's cold out the field is locked down sit your ares down and write it up so we can all buid one over the winter months. Bill
-
Rich do you have a link for those push rods I have a use for them in another project. Bil
-
BillI think I'm ready to paint or cover Edited By BILL PETTIT on 07/01/2015 22:05:06
-
-
-
Thanks for the help fellows but I think you misunderstood. Was asking Shephen if he was balance charging his batteries. I have a nice charger and it works fine. But thanks for your suggestions. Bill
-
Stephen: It sounds like you have been around the patch for a while now, but I'm going to ask anyway. Do you have a charger that balance charges each cell as it charges. I'm not the sharpest knife in the draw and that seemed to be the problem with some of my batteries and it took someone to say something to me about it.... Bill
-
I like my nose! It's a juce bottle that had an interesting neck. And the HK head mounted. I also set my motor on 1/2" standoffs so I could drill a hole behind the motor to route power leads. Bill Edited By BILL PETTIT on 05/01/2015 18:46:10
-
-
