Phil Francis

I use a evolution 20cc petrol in mine ideal power. The video on Horizon's web site shows it with a 20cc. Phil

Re bound with jumper in place on RX2 and all working as advertised. Thanks for your help. Phil

Yeah there both TFR8S! I'll give it another go later. Thanks Phil

Have put jumper on receiver 2 just on signal pins. Presume that's correct. Should the jumper be on when binding? with jumper in that position all channels on second RX act as normal IE C3 is throttle C4 is rudder and so on.  Just seen link and was same as picture! Phil Edited By Phil Francis on 07/06/2014 15:20:03 Edited By Phil Francis on 07/06/2014 15:22:07

Hello, has anybody managed to bind two Frsky TFR8S receivers and get working as 14 channels? I can get them both to bind but the channels still act the same on both receivers. Phil

The closest one to Southampton is probably Spire Models in Salisbury.

All sorted thanks to Ken A star.

PM sent Thanks Phil

Hello, i have just acquired a part built Acro wot kit but the manual is missing. Does anyone have a copy they could e-mail me? Not the ARTF one. Thanks Phil

My latest, Hangar 9 P-47 d1, Evolution 20 cc petrol. Flies like its on rails.

Hi all I've got the Seagull Zero with OS 120 fs up front, still had to add weight to the mount. Ballanced mine as instructions and flies fine. Replaced retracts with E-flite electric (plug and play) works first time, also sprayed mine with a matt lacquer well worth the effort. A few small niggles with the kit, use pull pull on the rudder pushrod naff. Tail plane farings, had two left hand ones had to modify to fit. Also as stated fire wall to prop driver incorrect. Apart from the above it flyes like a dream and looks the part in the air. Allways getting comments how good it looks and sounds.

Thin cyno also works well. Phil

Thank you all for your help. Phil

Ok thanks guys. Phil

How can you be sure that you are ordering from the UK HK warehouse? Thanks Phil

As J. Perkins have told me they have discontinued CMPro range of aircraft, does anybody know if anyone else will be importing them?