Mike Rowe

I have 2 Laser 70's they were in my Seagull Mosquito which I am now converting to electric. They have less than 2 hours running from new. They are in good used condition. I am asking £150 each ono plus postage.

Firstly Happy Christmas everyone. My new wings have just arrived from Seagull, I only ordered 1 but both arrived. So I started to strip the wreckage and have fund the mechanical retracts damaged beyond repair, can anyone recommend any electrical retracts to replace them. Many thanks Mike

Lets try again https://youtu.be/Wyhhc5tqP60   Edited By Mike Rowe on 12/11/2018 09:31:23

https://www.youtube.com/watch?v=Wyhhc5tqP60

Hi Jon, The engines were great at least on the video, poor though it is, you can hear the great sound. many thanks.

Very poor videos of first flight https://youtu.be/kyYhCZ2qI3k

Hi all, It was maiden day today, unfortunately it didn't go that well, firstly it pulled heavily to the left taxying so I had to increase the rudder movement, once the tail wheel lifted off it straightened up ok. Flew well could probably do with a bit of downthrust on the engines. Landing was a different story it dropped a wing when it was about 3 meters of the ground, broke the left hand wing into quite a lot of pieces, repairable. A little damage to the right hand wing, broke the engine mount and pulled the undercarriage leg out. I am going to ask Seagull if they could supply me with a LH wing. Everything else is fine . I guess I came in too slow!!!

Hi, I ran the Lasers for the first time yesterday all seems good, no big trouble to balance them. I am off to Spain for the winter so I will maiden it there https://www.club-cr.es/. anyway took a short video of the engine run. https://youtu.be/rQXNQVVK0Lc

It is a tight fit but I think it will work.

Hi Chris, I collected my 2 Laser 70s on Thursday from Jon, and I am now starting to mockup the installation, I think it will fit without moving the bulkhead although it will be tight. Any thoughts after having done all the work?

Can anyone help, I lost a wheel in flight with my Citabria and when I landed the prop touched down as well and has damaged the front bulkhead does anyone have the plan and can send me the drawing of this part, everything else is perfect. Many Thanks Mike

Hi Andy, Mine has been all finished for over 2 months now but I have been too busy or the weather has been bad so I have still not flown it. How are you getting on, have you flown it yet? Mike