Jump to content
Please be aware of scammers when using the Sale/Wanted forum areas

john stones 1 - Moderator

Members
 View Profile  See their activity

  • Posts

    16,470

  • Joined

  • Last visited

  • Days Won

    19

 Content Type 

Everything posted by john stones 1 - Moderator

  1. john stones 1 - Moderator
    Looks great Colin Too fast for the camera John
  2. john stones 1 - Moderator
    No tinnies though lads, you've still got building to do John
  3. john stones 1 - Moderator
    Question relating to travelling, are there any roads to avoid travelling from Doncaster ...ooop north roadworks etc ? John
  4. john stones 1 - Moderator
    Never saw it Rich I was building Will watch a bit tonight though John
  5. john stones 1 - Moderator
    Ditto WF. F plug and a bit of nitro John
  6. john stones 1 - Moderator
    Had wattmeter on, it shows 290 w (motor is 375) and 26amp This is on a 375w motor 2200 mah 3s lipo 60 amp esc..on an apc 12x6 prop Is this about right or should I go different on prop ? John
  7. john stones 1 - Moderator
    Got up nice and early, do some final checks before I go field can't get bullets to fit motor on esc, 1/2 hour later I realise I put male ends in for safe keeping when I soldered females on It's not good this getting old lark. So I plug it all in to set throttle range on esc....can't get out of programme mode ??? read instructions try 3 times ..nope still can't do it. Leave it and have cuppa.... this happened with Pushycat, what did I do ? Simple....plug esc into throttle port on rx NOT the battery one John p.s. its raining
  8. john stones 1 - Moderator
    Only just spotted it, C.G. seems to be well forward on the plan 48 mm from leading edge Did you lads find this o.k. or did you feel it was nose heavy? John
  9. john stones 1 - Moderator
    Cheers BEB John
  10. john stones 1 - Moderator
    Add me to list urging you on W.F get it done and join in next week John
  11. john stones 1 - Moderator
    It will Phil thanks, let you fly it Sunday John
  12. john stones 1 - Moderator
    All done balances with no lead, I used some fishing swivels for rigging wires, post is not glued in so it will transport easier, need to find a lady pilot for Sunday. Take her for sea trials after work tomorrow John
  13. john stones 1 - Moderator

    john stones 1 - Moderator posted a gallery image in Member Albums

  14. john stones 1 - Moderator

    john stones 1 - Moderator posted a gallery image in Member Albums

  15. john stones 1 - Moderator

    john stones 1 - Moderator posted a gallery image in Member Albums

  16. john stones 1 - Moderator

    john stones 1 - Moderator posted a gallery image in Member Albums

  17. john stones 1 - Moderator

    john stones 1 - Moderator posted a gallery image in Member Albums

  18. john stones 1 - Moderator
    I have confidence in you Phil John
  19. john stones 1 - Moderator
    Congratulations on passing Phil John
  20. john stones 1 - Moderator
    No mate Made a good job though, Is it a keeper ? John
  21. john stones 1 - Moderator
    Cracking colour scheme Tony, you made a great job of it John p.s. nice kit Richie
  22. john stones 1 - Moderator
    Agree entirely, attitude and example. Members also need to play their part, things wont work if you just leave it to committees. We are mostly adults, we shouldn't need telling. The kids need telling very rarely. John
  23. john stones 1 - Moderator
    Nice Cub Mike, love the Sukhoi in Will Curtiss's Honda colours John
  24. john stones 1 - Moderator
    I use plywood Darren, hardwood always splits for me because it's such a small piece. John
  25. john stones 1 - Moderator
    I agree with Bob, nice job and go with the paint finish, no matter how good a job you do of film it will eventually get lifted by fuel. John
×
×
  • Create New...