martyn sharp

  Thanks for the update Chris better then to buy small tins then pour just whats needed   Martyn

 Polymorth is as Tim says but I found it usefull for adding bits on to plasic figuars lifejacketts, helmets, ear phones etc dont need to spend so much on pilots then. I have used it as a mold when the cast has set warm it back up to relesse the cast ,but as Tim says its a bit heavey so i mold it round large drinking straws that bend for my pilots that mean i use less and get the shape right  and lighter but the dip will be usfull to finish things off as you can see from here lots of   MultipleColours.   Martyn 

  There is a product called polymorph a plastic that be come pliable at 60c and can be moulded to make pilots  etc and make moulds for other things its here    Martyn

 and another for the pound shop their clamps are good to 3 in a pack.    Martyn

  Here steve BRC    Martyn

according to SWMBO Men nerver read instuctions next she will telme that we car'nt read maps   Martyn

 good one eric well done    Martyn

 all done thanks Alistair sent PM with email and other info   many thanks   Martyn

 dose anyone on the forum belong to MMFC one of the members has built a TN Lancaster and did a good blog on it and the forum is now close to new members and there are a few question I would have like to asked .  thanks   Martyn 

 Look forward to it if there is anything you need or info PM me and i will try and help   Martyn 

 we can fly on the camp there is about 6 of us flying there so dont worry to much. I work as one of the SIOs there so i guess i will look forward to seeing you.   Martyn  

phil are you suituiated near the camp ?    MartynEdited By martyn sharp on 26/09/2010 12:34:48

 PHil have you found a club yet ?   Martyn

 The weather on sunday was windy and a bit overcast but flyable .  Martyn 

 We were there for the whole weekend and the flying comment was great i was hoping to see a few more jets and maybe a  TN model or 2 .i picked up a TN Lancaster for a winter project build (which reminds me is there any one from medway flying club on the forum) i did enjoy the mustang flight on sat a bit of a surprise to see him land good through.  We spent the week in Kent went to the battle of britain memorial at folkestone to pay our respects and the BoB museum at ex RAF hawking's this was fantastic for £5.00 it is full of exhibits it small but we spent 4 hours there well worth a visit if your in the area.   Martyn

Eric  I  use a 5000mAH in mine the COG is just sliglty noese down and I get loads of flying time and I roll ,loop and other moves so i guess the answer is yes you can  altrough i use a brusless setup .   good tips in the mags and web.   Martyn   PS did the manuel help   

 I like the SMS  its nice friendly show and as for the cost well lets see I go for 3 nights camping  with an electric hook up and there is 2 of us and a dog  and it cost me £58.00 and includes entrance to the show for the 2 day (Friday as well lots going on )  i grew up in the area so i catch up with friends and family as well looking at a lot of attractions going on its cheap the Eden project was £17.00 pp  and it normally cost me between £16-25 per night camping . all cost go up and yes I know wages don't but this is a show where people give their time ,talent for nothing so its good value as far as I'm concerned.   keep flying   Martyn  

 Hi Clive i had herd some one was making a gas turbine version  have you spoken to 101 Sqn  brize norton themselves they might be able to give you the right shade or the code for it when i served on 10 sqn we were ask all sorts of questions from modelers and tried to help . will we be able to get access to your 2.5 meter plans to  build  also a few more details would be nice   Thanks   Martyn

  I think he ahs just started one i use to use them back in 1986 when i was at Lynham then i use to help out trever at  model maniacs when he own it and  was in church street and still use them now when i go to see my mum ,sister  where do you fly ?. Martyn 

Posted by Ackers on 27/07/2010 13:42:16: My Main LMS is model maniacs (who also have an online side) and even closer is scale gliders, who sadly are in the process of closing down.  I'm not sure either will get strong votes from a sparsely populated area and I suspect many South West model shops will suffer the same way and loose out to shops in bigger cities/denser populated areas.     do you not use swindon model center Yan and rose  normaly has a good stock i use to  live in Calne  

 And the Martyn vote as follows   1. Best high street retailer   Channel 4 models  Bournmouth   2. Best mail order retailer   BRC   3. Best ARTF kit  Sebart shark   4. Best UK distributor   JP    Martyn  

 RW unless i,m reading this wrong you have 2 servos on the elevators and when you use a Y lead they act like airlons. If you use a long servo arm and connect one elevator to the top of the arm on one side and the botton on the other they should move the same way well it did with my Spacewalker .then maunuly adjust to correct saves on mixing and I have got my spacewalker set up with an ar500  hope this helps   Martyn  

 Hi Geoff looks like a good idea,there are  bound to be a few teething problems, there always are in IT no mater how well you plan. I realy hope it takes off for you (yes a pun !) it now in my favorites well done .   Martyn Edited By martyn sharp on 26/06/2010 07:56:00

 Well done Ross i would have sooner paid £25.00 than what i paid for mine all 4 side can be cut for a range on models EG: flying boats need a deeper slots so once again well done a brill idea    Martyn

 Buster i have the building instructions in pdf form if you PM me with your e-mail address i will send them to you has reconmed setups in there for both leccy  and IC martyn