Alan Gordon

Hi Thanks again for your advice, I am not to sure whether I did what you suggest,Will ensure proper switch on procedure in the future Regards

Thanks Timbo Yes, I have experienced the short delay while the system finds it'self !!, However this delay was for approx 15 mins before i decided to take the model home! When i got home the system still did'nt connect. this is when the I recharged and then had to Re-Bind. Alan

Hi I have had my Spectrum know for a couple of months and i have to say it has preformed very well. However what has prompted me to write this posting is that, the other weekend when i was out i decided to have "one last flight" when i switched on the system, nothing, not a dicky bird and dispite me checking the connections ect. no fault was found. I went home charge up the batteries and still nothing, I decided to RE-Bind the system now all is well. Scary !!!! Any comments or advice would be appreciated.

Thanks Toni It is a bit disconcerting however I guess I will get used to it !!

I am noticing a delay between switching on th TX and the R/x's' picking up the signal any comments

Mission accomplished,No 26 purchased will now get FSM 04 Thanks a lot gents

Thanks for the info dave I will give them a call tomorrow .

Hi Guys, I am building a Mick Reeves Camel I would like to get as much scale details as possible can any one recommend a publication for this detail.

Hi, it looks like you need a pair of "Flair" wheels, these wheels were supplied in Flair kits ie Pupateer,Legionair ect I think Marionville Models (Edinburgh)have some in stock.

Peter My appologies I have mislaid you telphone number and email address can you send on to me. Cheers Alan

I have been thinking of ways to fill and drain a tank without the need to remove a cowl to access the carb feed for draining or holding the model verically at the end of the day to drain the tank. The answer seems to be use two clunks 1st clunk fitted as usual and connected to the carb, but another clunk running along side connected to one vent that you can fill and drain, with the other vent pressurising in the normal way and acting as the tank full indicator.Hope this is of use to anyone.

Peter my email address is [email protected] send me yours and we can talk direct the above email is my office address my home address is [email protected] cheers Alan

Peter Thanks once again for your help I really wanted to get hold of the parts for a Hawk 70 Having said this I would pleased to buy copies of the plan for the Stampe,could you supply the copies if so I would pleased to send you a cheque regards Alan

Thanks for your reply Peter I contacted Masons who where very helpfull. They are having problems in certain areas of production however they hope to have production up and running in a few weeks time. if you had the cowl and wings for the Chippahawk I am sure we could come to some arrangement Once again thanks for your help

There was once a kit manufacturer called Skyways Models he produced an excellent range of Plan Packs i would be interested in at least getting a hold of the plan for the Hawk 70 can anyone help. All the best