Mark Perry 1

Thx all for the advice

Interesting option. Any experience of these?

Thx both The ‘setup list’ on Tx takes me from ‘Range check’ ( 9 ) to ‘Contrast’ ( 10 ), whereas the manual lists ‘Power setting’ and ‘Modulation type’ in between the other 2 options - the ability to switch modulation doesn’t exist in my Tx scroll list. I assumed that was because of the backward compatibility statement - but from your experience sounds like that doesn’t work for my Tx ☹️.

Hi all I’m returning to flying after a few years break and trying to commission a new-to-me 2.4 ghz set up as above. I’ve spent a lot of time searching forums for the answer to my issue but getting nowhere. I repeated the procedure with a second AR7000 and its satellite, and replaced a connecting wire between them. Before I bin the lot and return to 35 mhz can anyone help with my issue as below? Using DX6i ( DSMX ) and AR7000 ( DSM2 ) and it’s satellite ( DSM2 ) (DSMX Tx is backward compatible with DSM2 Rx according to Spektrum website) Preparation Tx off ( throttle and it’s trim previously set to min ) Rx = no battery connected Actions Rx - Put bind plug into horizontal slot ( BATT/DATA ) Rx - Plug charged 4.8v Nimh into THRO slot (although any other should do) Result = rapid flashing on both Rx and satellite LEDs Tx - from 6ft away, hold up Trainer switch (=bind switch) and turn on Tx Result = blinking on Rx ( but no LED on satellite ), then LED stays solid on Rx (still nothing on satellite) Release trainer switch and LED stays solid on Rx (no LED on satellite) Remove bind plug from Rx - still solid LED on Rx, no LED on satellite Remove batt from Rx Turn Tx off Bound ??? Turn Tx on Connect Rx batt Result = single brief flash on Rx then nothing on Rx & nothing on satellite Not Linked ??? Help !

Thx Cymaz - have now posted there ( can’t see how to delete from this thread )

Bit late to this thread ( !!! ), and apologies if I’m posting in the wrong place - but I’ve got one for sale. All the work done to a high standard with an ASP 120 fitted. Just needs wheels and aileron joiner wires. Doesn’t look like it’s ever been flown. I’m based in Plymouth.

Hi Dave - if the original poster never replied, I’d be interested ( I’m assuming it’s not built so could be posted )

Hi Allan Did you manage to find your original photos ? Mark

Hi again all PilotError - I would love to get hold of a copy of the plan - is your offer still open ? Thx, Mark

Thx Gents - Bucker Jungmann looks promising, but I can't find anything on the Pat French connection ( don't try googling French models ! ) A great tip on the plastic struts - I'll wait a bit longer and see if anyone can come with a plan or any pictures

Hi - my first real post, and it's a question ( hope I've done it correctly ) I've saved an old Bipe from being put in the dustbin but I need to find out some details to help me complete the build. First question - what is the make & model ( 5 pictures in my one and only album). 46 inch span, foam wings ( built up wing tips ) Once identified I'm hoping to find out the C of G, interplane strut position / shape / method of fixing to wing etc Any help appreciated Thx