michael wilson 1

Hi, sorry only just seen your post, yes, still for sale this is the gold edition btw.

Around 250.00

New in box Topflite p51d Mustang kit, rare kit, collection Kidderminster.

A couple more photos,

New Hangar 9 carbon cub with 15cc evolution petrol engine, 90" wingspan, complete with all servos and receiver, batteries not checked so would benefit from replacing. Never flown, was a little ambitious for me i'm afraid after purchase! 1 tank of fuel run through to help run in. offers? collection Kidderminster

Even this glimpse, I can see you have a very impressive model!

Thank you Jon, I will certainly consider your engines for this project.

Thank you for your replies, Yes this is my first warbird Chris b, I'm just finishing a Top Flite Cessna 182 using a Saito FS 91, Perhaps a similar engine for Mustang? I will look at all suggested options though. I have seen some Turnigy alloy electric retracts, Would I be correct to get 85 deg. to allow for wing camber? I'm not such a good pilot yet but enjoy building although have some electric trainers.

Hello and Happy new year! I have recently purchased a Top Flite Mustang 60 kit and need to make some decisions early on Which engine to use? I prefer 4-stroke but also like the idea of petrol, Which retracts? and servo's? I use Spektrum radio, Any help and suggestions will be welcome, Thanks Mike.

Hello, I have the ar9350 receiver in a hangar 9 carbon cub 15cc, can anyone suggest some figures to program receiver initially? and settings for dx9, I am a beginner so nothing radical! Thanks for any advice, Mike.

Thank you for your response but I have watched every video and still cannot get gyro's to work, app. connects, receiver works as normal, perhaps the transmitter (dx9) is not programmed correctly? does anyone have these settings? Thanks, Mike.

Hello, I'm hoping someone can help me, I have a couple of small planes with as3x already pre- installed and decided to purchase an ar636 receiver to fit in a funcub, I have the programming app installed on an i-pod and the receiver is working as normal but cannot seem to get the as3x activated, can anyone tell me what settings I need to do to make it work? Thanks, Mike.

My first post on here, I'm building a topflite Cessna 182, with saito fs91, quite a challenge but I enjoy building, not such a good pilot so bought a hobbyzone sportsman safe+ for some practice! recently finished (apart from painting) a west wings hawk, made a few mods along the way moved the aileron servo's inboard slightly to be able to use normal mini servo's, bigger dowels on fin, glassed wing joint, magnetic catches on canopy, anyone fancy maidening her?