Kevan Gillings 2

Thanks for the info,looks the same as most other sets. I am thinking of one for my model boats as an upgrade. E bay price is about £100 including post from the UK, model shop price, about £160 plus PP.

Hi, is it possible to change a mode 2 TX to mode 1, without sending it to the agent ,as stated in the instruction manual ? The manual says how to change it electronically but not the sticks. I have changed the mode on a number of TXs over the years but this may be a little different.

I am thinking of this kit and doing it electric. Has anybody any experience ref this model ie, weight ect? Kevan Gillings   Edited By Kevan Gillings 2 on 09/05/2019 13:23:33

Hi, advert does say, motor, ECS and servos. I did not think that this forum is for adverts just discussion ?

Hi, I have a Krick Klem electric,I fitted a 300 watt motor on 3cell 1800 mah LiPo,it fly's very well and looks good in the air.The kit was of very good quality and nice to build.It is the oldest model I have, and I have decided to sell it on while it is in good condition and have put it on the BMFA classified site, surprisingly I have had no interest in it, may be people do not know the aircraft !!! Do they all want foamy warbirds ?

The plan is available through Sarik hobbies as number RM11, also there is "son of vertigo" !!!

Had a Hyundai suv for 10 years , grat car, no problems/cheap to run. Changed to Vauxhall Insignia estate,had it for 18 months, got fed up of taking it to the local main agent for faults under warranty, changed back to the Hyundai.

Hi, the plan is on Outerzone.

Just tried to get a set of drawings for the Vega V twin engine from them. They do not seam to be able to differentiate between a plan for a model called vega and an engine.

HI, have a look on the web under "Boll aero 1.8 diesel or boll aero 4.4 diesel" he does the drawings for both, both made from bar stock. Kevan

HI, the Venturi in the carb produces Bernoullis therum, ie air flowing through a restriction speeds up, therefor causing a drop in air pressure, the fuel at the jet tries to fill the low pressure due to atmospheric pressure acting on it , so we get a mixture of fuel and air.

Hi, have a look at Component Shop site, they give the power output of there brushed motors under "more information" Its surprising how little power the brushed motors produced.

HI, if I think back mine was a canopy for the Acro Wot. Kevan Gillings

HI, if I think back mine was a canopy for the Acro Wot. Kevan Gillings

HI, mine was the orange one at Loughborough, I used a Vortex canopy cut down. I live close to Steve and took the fus to see what he had to fit. Kevan Gillings