Stephen Jones

Yes, I had the same email, Thought it was something I had not done correctly also check my portal. I need to login again to see if anything has changed. Steve

Hi Richard, I have been wait for the weather to be nice enough for me to go outside and do some sanding. Blades and motor mount, hopefully tomorrow will get some sanding done. I notice the other builder have used closed loop for the Rudder and added extra weight to the nose. Looks like you are just using a push rod for your Rudder is that right. And did you add weight to your nose. ? Steve (Number 1) 😁

More wood than I currently have would of gone into making the spats so I have decided to try Depron. So above is 5mm Depron sheet. And seven layers of foam later My foam wheels are 55mm in Diameter. waiting to fully dry then I will add thin ply on the inside and out to allow a good fixing point. Oh and sand of coarse 😜 The some of parts covered in scraps of covering and tape. Steve.

What res is best ? Steve

Thanks 👍🏻 Just finished cutting out 14 spat part's Each 5mm thick. Steve 🥴

Here is a Picture of mine so far. Boots, Blades and motor mount to Do. Steve.

After much trouble with my Radio gear and Motor losing a gear I have managed to get this flying this weekend. So problem with my receiver solved by calibrating the settings in my External Tx. Replaced the Elevator/Pitch servo with a 5g servo and fitted a new Brushless motor. Although this motor is not ideal as it is a high speed battery guzzler but at least I have managed to proof fly it. Just need to find the best motor for this model. Steve.

Hi, I have also started this build with the kind permission Of Richard Harris. Here are some of my build pictures. So here you can see the Tail plane and Fin along with the center core of the body. And the rest of the parts to be cut out of lite ply. I find that the Liteply parts can easily be cut out with a Box Knife. As Above. So thats the construction of the Body. This is a dry fit of the Battery tray and under carriage parts, I now need a wire bender to form the under carriage legs before I can assemble the rest of it. Cheers Steve.

Just watched your video it looks great. I want to build one now. Well chuffed for you. 👍 Steve.

Thanks Mike , I have read the other post and done it. I just need to email T9 now. Cheers I have learn so much today even found a snake game on my Tx that I did not even know was their. Steve

Sorry guys am a bit lost. Their are different scripts for different tx which is the one for me is their a file I download or do I copy paste. Ok so i have found the icon to download the file which i have done. so where do i put it on my tx and how do i run it. ? cheers Steve. confused i am