Dave Parrish

Hi Steve  Have not had chance or weather for a test flight yet.  I also have  a J3 Cub with F54S thunder tiger in it to test fly. I know..... should not fly a new airframe engine and radio gear all at the same time but got to get it done just not in wind and rain.  Live on the south coast..... thanks for the interest. Will keep you posted (lol)  although last time out I ploughed a field with my edge 540 canopy first.   To low in outside loop     oops... Kind regards Dave..

Hello Steve,  Thanks for the reply.  Engine is going to be my old thunder tiger .25. At least I know that will be realible. Have noticed the thrust line is built into F1 so must be ok. Unless they had it in the jig upside down lol. Cheers DP

HI all, Just wondered if the thrust line on this model is correct. Have just put one together and the enginr thrust line is at least 2 deg left. Every trainer type model I have built over many years has always had right hand thrust and also some downthrust, Just wanted to check before take off. Thanks in advance DP

Channel 4 models. Charminster rd. Bournemouth Swang hobby.           Hong Kong Giant cod                    UK Art tech Corsair          UK

Must have a huge shed!!!!!

Hi. Thanks for the reply. If you see DB again,  tell him I liked this as a trainer so much I built 4.... Various mishaps while learning.... Still fly one with a .25 thunder tiger ic. great... Happy flying and merry xmas Regards Dave

HI, Just wanted to know if anybody else thought that this kit looks very similar to the David Boddington Tyro Two of about 20 years ago.  No disrespect to the late great Ben Buckle intended. Regards Dave

Hi there, I'll have another go.Thanks...

Hi, I like it to be me this time.MEGA please....

Hi Owen, Thanks again for the info. I did adjust the swashplate but did not anticipate the change needed for the trims. Just doing a quick adjustment..... Ah. Just had it hovering almost handsfree and the blades are still intact. That made for a lot more relaxing flight . Brilliant.. Thanks again Best regards Dave...

Hi Owen, Great piece of info, brilliant thankyou. my swashplate is not level, its leaning forward. This could also be why it flys backwards fairly quickly but struggles going forward. If I could ask another quick question,,, I am braking more blades in flight , than I was when learning (still am learning). They hit each other quite a lot when doing a tight turn or there is a strong gust of wind (strong for this heli anyway) am I being to violent on the sticks? Thankyou again Owen Kind regards Dave...

Cheers Birdy. Got it flying a bit better but then took the heads of the girlfriends carnations in the garden . Now I'm in trouble. Have to fly in the car park now, wish we could have a calm day for a change. Have also got an EDF jet waiting for its test flight but way to windy in the south. If it aint windy its hacking it down just cant win. BIG SIGH. Regards Dave.

Thankyou both for the replies. The heli is a CML Orbiter. Last time I wrote a thread Eric you did not now this heli but its just like any other contra heli similar to v3 and v4 Llama. I was also told this was factory set but kept on crashing it. Then found out a bit of plastic housing had come unclipped from the swashplate so I did not have any control at all on the pitch of the blades and the servos were flopping about doing nothing. Is gain the same as pitch? Kind regards Dave.. P.S. the heli is flown just above head height but still needs left stick input to keep the nose facing the right direction. I fly mode 2. Rudder and yaw on left stick + throttle.

Hi all, I have a contra rotating heli which turns to the right (starboard if I need to be correct) on take off. I have full left trim on the transmitter with no adjustment left. My question is this, there are two pots on the gyro/Esc unit but which one alters the yaw is it Gyro or Pitch. I guess it may be Gyro but am not sure. Hope someone can answer my question thanks.... Kind Regards Dave.

Like to win this.Just bounced my edge 540 of the deck.Oops!!!