Tim Davies Posted March 8, 2010 Share Posted March 8, 2010 hello,is it true that digital servo''s have about twice the torque of ordinary servos''s(for the same physical size and sec/60 degree),and if so, how do they achieve this. thanks in advance regards tim Quote Link to comment Share on other sites More sharing options...
Jonathan Lewzey Posted March 8, 2010 Share Posted March 8, 2010 It depends mainly on size of servo, but i don't think this is correct. Digital servos check their position much more frequently than analogue ones and are therefore faster and more precise. Torque is only affected by gearing and power output of the motor? Quote Link to comment Share on other sites More sharing options...
birdy Posted March 8, 2010 Share Posted March 8, 2010 Not true. Whilst analogue servos use a pot to measure their position, digital ones er... use a digital thing, which is more accurate. Hence why we not all high torque serovs are digital! Quote Link to comment Share on other sites More sharing options...
Frank Skilbeck Posted March 8, 2010 Share Posted March 8, 2010 Isn't it also that the torque on analogue servo's drops off as it nears position whereas digital servos keep a fairly constant torque until the required position is achieved. Quote Link to comment Share on other sites More sharing options...
birdy Posted March 8, 2010 Share Posted March 8, 2010 Not sure, but I think analogue is "that'll do", and digital is "Oh my god its not perfect. move now!!!" Quote Link to comment Share on other sites More sharing options...
Jonathan Lewzey Posted March 9, 2010 Share Posted March 9, 2010 Posted by birdy on 08/03/2010 22:37:07:Not sure, but I think analogue is "that'll do", and digital is "Oh my god its not perfect. move now!!!" lol, i like this explanation . IMO you only need digis for aerobatics and 3D helis etc. Quote Link to comment Share on other sites More sharing options...
Clive Matthews Posted March 9, 2010 Share Posted March 9, 2010 This is serious nit picking and doesn't really relate to the 'are digital servos better than analogue ones' debate, but; As a rule analogue by definition gives a more accurate resolution than digital. Using a sine wave as an example, analogue would be any point along the curve whereas digital is a series of sample points along the curve. A little off topic but I get so fed up with the 'digital must be better than analogue' assumption. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.