John Sheehy Posted March 16, 2010 Share Posted March 16, 2010 Hi, I have a Futaba T6exa 35mg transmitter that has developed a fault. Set to mode 2, when I move the ailerons the elevator servo moves also. Elevator stick has no effect. I've tried reversing the servos in the settings, I've tried all six setups including one reset to clear all settings. The aileron pot is operating two channels for some reason, as there is no glitching or signs of radio interference.Both servos move steadily and in unison. Receivers are fine and working, using my old Challenger. I changed over to 2.4GHz last year but now I've got a FPV kit and so any plane I want to put the camera on needs to be controlled by 35MHz radio. Any suggestions or help would be great (can't spell the appreci.... word).Thanks,John. Quote Link to comment Share on other sites More sharing options...
birdy Posted March 16, 2010 Share Posted March 16, 2010 If I were you, I would record all the settings for all my models, then completely reset the tx. If that doesn't work I would send it to be serviced. Good luck, birdy Quote Link to comment Share on other sites More sharing options...
Wingman Posted March 17, 2010 Share Posted March 17, 2010 Well it certainly sounds like there's a programmed mix working although you say you've reset everything - I would still try a default acro program to try and get all the stick axis's working individually. Quote Link to comment Share on other sites More sharing options...
Chris Channon Posted March 19, 2010 Share Posted March 19, 2010 Hi, sure it is not in " Heli" mode ? Quote Link to comment Share on other sites More sharing options...
John Sheehy Posted March 20, 2010 Author Share Posted March 20, 2010 Thanks guys,It's not in Heli mode as there is no Heli mode and there is no facility to programme in the effect I'm getting. I'm not very good at sending things back, and I've fitted a pod in place of the gear switch on my Challenger, giving me full control of the camera (up-down, left-right), so the pressure is off for the moment. I'll look around for a secondhand 35MHz computer trannie. I need a computer transmitter in order to use the head tracking gizmo currently costing £165 so it'll be some time before I raise that. Thanks again for all your help,John. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.