Russell Mexome Posted November 24, 2010 Share Posted November 24, 2010 I currently use 4 mm banana connectors on my batteries. I intend to connect 4 x 3s 2200mah lipo batteries, to make up a total load of 6s (22.2 volts) and a capacity of 4400 mah. I cannot seem to find a double connetor for a banana type plug. Has any modeler had this problem befor and if so how have you overcome it. Quote Link to comment Share on other sites More sharing options...
Dusty Posted November 24, 2010 Share Posted November 24, 2010 Just make your own! Works out cheaper soldering your own connecter's to some wire than it does to commercially buy series/parallel lead's Quote Link to comment Share on other sites More sharing options...
Tony Smith 7 Posted November 24, 2010 Share Posted November 24, 2010 For normal 4mm banana plugs you can get "stackable" versions, which let you put multiple plugs into the same socket. See For Example Quote Link to comment Share on other sites More sharing options...
Russell Mexome Posted November 29, 2010 Author Share Posted November 29, 2010 Thanks guys, looks as if I will have to solder wires together, as I will be drawing more than 10 amps, The banana plugs are only able to handel 10 amps. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.