Mark Posted September 3, 2011 Share Posted September 3, 2011 I'm trying to set the brake ON on this ESC without any success. I can enter the programming mode OK and hear the sequence of ever increasing number of beeps but whichever one I try to change by moving the throttle to low it doesn,t affect the brake - or indeed anu other parameter although it does exit the programming mode at low throttle. There must be some other action on the throttle to actually change a parameter. Anyone got any instructions or experience with this ESC? Mark Quote Link to comment Share on other sites More sharing options...
Mark Posted September 3, 2011 Author Share Posted September 3, 2011 Typo - not 4A - 48A! Quote Link to comment Share on other sites More sharing options...
Mark Posted October 1, 2016 Author Share Posted October 1, 2016 Long time ago but did you ever get this sorted. I have just put this ESC in a glider and need to activate the brake. Mine is behaving just like you describe yours. Cheers, Mark Quote Link to comment Share on other sites More sharing options...
Denis Watkins Posted October 1, 2016 Share Posted October 1, 2016 Mark, go into programme mode THRO stick to full Hear 2 beeps THRO stick to low Get out of Program The brake is now on Quote Link to comment Share on other sites More sharing options...
Denis Watkins Posted October 1, 2016 Share Posted October 1, 2016 If this doesn't work, the THRO needs reversing And both ways, make sure that the throttle TRIM is set LOW too Quote Link to comment Share on other sites More sharing options...
Mark Posted October 2, 2016 Author Share Posted October 2, 2016 Denis, Thanks for the quick reply. Mine doesn't seem to work like this. When you enter programming mode you just get a series of ever increasing numbers of beeps. I've tried closing the throttle after the pair of beeps but it doesn't change anything. Trim is set to fully low. The throttle works in the correct sense so is there any reason to reverse it. Mark Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.