Phil Claridge Posted February 9, 2008 Share Posted February 9, 2008 HELP can anyone tell me whats up with this lama,when i plug in the lipo the red led starts flashing then the green one flashes and sometimes stays steady but when i switch on the tranny the servoes and motors go mad,first the servoes then three seconds later the motors. the tranny and crystals ,battery have been checked on a another chopper aerial is out to full length any ideas please Quote Link to comment Share on other sites More sharing options...
Former Member Posted February 10, 2008 Share Posted February 10, 2008 [This posting has been removed] Quote Link to comment Share on other sites More sharing options...
Alan B Posted February 10, 2008 Share Posted February 10, 2008 Hi PhilWhat you are saying above is that you are switching the receiver on first then the tranny Tranny on first - ALWAYS! Then then plug in the Lipo! then when you have finished flying - unplug the lipo first - then switch your tranny off.Al Quote Link to comment Share on other sites More sharing options...
Former Member Posted February 10, 2008 Share Posted February 10, 2008 [This posting has been removed] Quote Link to comment Share on other sites More sharing options...
Phil Claridge Posted February 11, 2008 Author Share Posted February 11, 2008 hi eric and alan ariel is out to full length and both crystals and tranny checked on a another heli,see first post. alan have tried tranny first rcvr second no difference, have noticed green led stays on with red flashing. it will do this without the tranny being on Quote Link to comment Share on other sites More sharing options...
Alan B Posted February 11, 2008 Share Posted February 11, 2008 Could be just faulty! On some helis with combined receivers the throttle trim has to be in a certain position before it boots up. Could try that- should be in the instructions. They also sometimes do this if the tranny ariel is not fully extended. Quote Link to comment Share on other sites More sharing options...
Michael Willard Posted March 4, 2008 Share Posted March 4, 2008 Hi all, Just a few points to make sure we all know whats going on. Try this in order.1. Throttle stick all the way down2. Throttle trim all the way down.3. Other stick and all other trims centre.4. Turn the TX on5. Plug in lipo.6. Wait for steady green LED.6 fly.hope this helps, not been flying long myself. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.