Unkown - Please identify ?

[Delta Whiskey]

Club member recently passed away and left this model for which his wife asked me if I would get airbourne, it's wing is complete and not shown in this picture but is more or less ready for radio gear, it even come with a hacker A20 motor fitted losely in the model nose and a hacker 7A speed controller which seems a little small to me? Motor spec shows 1080 rpm and speed controller suggest 3s setup, I thought a 1300mah would do for this 3 channel model?

Advice please !

[Tim Hooper]

Looks like one of Andy Clancy's Lazy Bee range of designs.

tim

[moorer]

yep,looks like a Lazy Bee to me too.

[Caveman]

Hi DW, I think it's a Big Lazy Bee by Clancy Aviation.

Have a look here for the plans:-

http://www.outerzone.co.uk/plan_details.asp?ID=2799

http://www.outerzone.co.uk/plan_details.asp?ID=2278

http://www.outerzone.co.uk/plan_details.asp?ID=2316

http://www.outerzone.co.uk/plan_details.asp?ID=2800

This doesn't answer your question about the motor etc. but the 40" wingspan model has a recommended 2 stroke engine of 0.049 to 0.15 which suggests an electric setup of between 100 and 250 watts (??), so a 7A ESC does seem to be too small.

GDB

[Delta Whiskey]

Thanks chaps, I'll have to do some config checks and put a bigger esc on and test power.