crispin church Posted May 19, 2013 Share Posted May 19, 2013 EMAX BL2810/12 378Watt 1100Kv make elevator fixed will change wheels whats my chances ? Quote Link to comment Share on other sites More sharing options...
Richard Harris Posted May 21, 2013 Share Posted May 21, 2013 Crispin, For me the mast may be a touch too high? You will more than likely need quite a bit of down thrust to compensate this. Is the nose to short? I think there is only one way to find out! good luck and let us know how it goes. Rich Quote Link to comment Share on other sites More sharing options...
crispin church Posted May 21, 2013 Author Share Posted May 21, 2013 what the max tilt back angle i think i can take 2" off mast ? Quote Link to comment Share on other sites More sharing options...
crispin church Posted May 21, 2013 Author Share Posted May 21, 2013 i shortern the mast by 1 1/2" will try to fly asap Quote Link to comment Share on other sites More sharing options...
ken anderson. Posted May 22, 2013 Share Posted May 22, 2013 well done crispin....pushing the frontiers and all.........................everything will fly once......after that ? .... ken anderson ne..1 .......fly once dept.... Quote Link to comment Share on other sites More sharing options...
crispin church Posted May 23, 2013 Author Share Posted May 23, 2013 well what can i say our new flying site well rough field with two runway strips for full size planes grass too rough for take off so hand launch like i do with durafly autoG blades made all the right noises thro up push away and it sunk to the ground then caught the wind and done a loop the loop into the ground i think too heavy for blades stick with the autog and see if i can get into the frame of mind to make the great panther i got both mags and plans just that i cant seem to build lite Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.