Martin Hickey Posted July 28, 2013 Share Posted July 28, 2013 I have a multiplex funcub and canI use Zap a gap CA MED Glue on the EPO material Quote Link to comment Share on other sites More sharing options...
David Molineux Posted July 28, 2013 Share Posted July 28, 2013 I'm pretty certain you need the zap foam safe for that. You have to use the foam safe 'kicker' too according to the bottle. Dave. Quote Link to comment Share on other sites More sharing options...
John Lee Posted July 28, 2013 Share Posted July 28, 2013 Zap CA medium is fine. Multiplex's own Zacki is a bit better. The Elapor foam used by Multiplex does NOT need foam safe adhesive or kicker - if you have the FunCub manual the recommended adhesives are on page 10. John Quote Link to comment Share on other sites More sharing options...
Bruce Austin Posted May 13, 2016 Share Posted May 13, 2016 Hi Guys Lots of info and topics on your glue for EPO threads, but quite a search!!!! What is the recommended glue for crashed (crushed) EPO, that will fill in the small internal spaces. I have used the hot water trick to remove most of the distortions, but with a couple of the deeper cracks, I am worried about not getting proper surface to surface contact when tying to glue everything together. All recommendations will be welcome. Go With the Flow Bruce Quote Link to comment Share on other sites More sharing options...
Pete B Posted May 13, 2016 Share Posted May 13, 2016 Gorilla Glue - use sparingly as it does expand a lot! Pete Quote Link to comment Share on other sites More sharing options...
YakMad Posted May 13, 2016 Share Posted May 13, 2016 I am now using Bob Smith Industries Foam Cure for all larger repairs to my foam models, gap filing and slightly flexible, gave up on CA as I found it is too brittle for repairs to EPO foam. **LINK** Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.