Erfolg Posted March 15, 2008 Share Posted March 15, 2008 What is currently available for sticking white foam cores to obechi veneer (or is it the otherway round).In the past it was Copydex. I have not seen that around for some time, certainly not spray-able.RegardsErfolg Quote Link to comment Share on other sites More sharing options...
Former Member Posted March 15, 2008 Share Posted March 15, 2008 [This posting has been removed] Quote Link to comment Share on other sites More sharing options...
flytilbroke Posted March 15, 2008 Share Posted March 15, 2008 Try this, http://www.tooled-up.comLots of copydex Quote Link to comment Share on other sites More sharing options...
Andy Green Posted March 15, 2008 Share Posted March 15, 2008 The best stuff to use is Epoxy (thin layup stuff, not araldite), but you will need to vac bag it to cure, copy dex is the most common, but I have used 3m 77 (spray photo mount like glue) in the past on blue foam and it worked a treat. Andy Quote Link to comment Share on other sites More sharing options...
Guest Posted March 16, 2008 Share Posted March 16, 2008 I seem to recall that there is a spray adhesive that can be used - but dont remember detail Quote Link to comment Share on other sites More sharing options...
Cpt Biggles Posted April 3, 2008 Share Posted April 3, 2008 copydex with a small amount of food colour in so you can see where your spreading it on white foam. Quote Link to comment Share on other sites More sharing options...
Erfolg Posted April 3, 2008 Author Share Posted April 3, 2008 As it was a small job I was doing, I decided to go the Eric Bray route and use PVA on the veneer. It worked very well.I was suprised that copydex is still available, particularty in bulk volumes, although no longer available in the High Street, so it would appear. I have used epoxy in the past, but found it difficult to get a light build. Even when scraping of the excess from the veneer. Bagging definetly required to get the unit area pressure necessary to get a good bond.Thanks Eric, simple can be best (or at least good enough).RegardsErfolg Quote Link to comment Share on other sites More sharing options...
Former Member Posted April 3, 2008 Share Posted April 3, 2008 [This posting has been removed] Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.